Abstract:Synthesis methods of composites. Copper‐based metal–organic frameworks is anticipated to find applications in the field of friction materials owing to its plentiful surface‐active groups and distinctive framework structure. In this study, copper‐based metal–organic frameworks was synthesized through ultrasound‐assisted method and incorporated alone into carbon fiber reinforced epoxy composites or together with SiO2 nanoparticles towards the goal of improving the composites' friction and wear properties. It is revealed that copper‐based metal–organic frameworks alone cannot improve the friction and wear of carbon fiber reinforced epoxy composites simultaneously. The combination of copper‐based metal–organic frameworks and SiO2 nanoparticles was more effective in enhancing both the mechanical and tribological properties of studied composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s. Additionally, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3 N/m. Through morphological and chemical analysis on the worn surfaces and transfer films, the functioning mechanism of copper‐based metal–organic frameworks in modifying the mechanical and tribological properties was discussed. It was discovered that a tribological synergy exists between short carbon fibers, copper‐based metal–organic frameworks, and SiO2 fillers, leading to a shift in the wear mechanism of the composite materials from abrasive wear to adhesive wear. Concurrently, a shear‐prone transfer film forms on the surface of the counter steel surfaces. Findings of the present study pave a new route of designing high performance epoxy based tribo‐composites by using metal–organic frameworks. Highlights Cu‐BDC nanosheets were synthesized using ultrasound‐assisted techniques and incorporated as tribological fillers in EP composites. The combined use of Cu‐BDC, SiO2, and SCF fillers synergistically enhances the mechanical and tribological properties of EP composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3N/m. During the sliding friction process of the composite materials, Cu‐BDC and SiO2 play a crucial role in reducing SCF pull‐out wear through their anchoring effect. The dynamic coordination bond structure of Cu‐BDC contributes to the formation of uniform and continuous transfer films on counter metal surfaces.

Friction and wear properties of copper matrix composites reinforced with short carbon fibers

Study of Friction and Wear Properties of Cu/Short Carbon Fibers Composites

Effect of carbon matrix on mechanical and tribological properties of Cf/Cu/C composites

Tribological properties of carbon-nanotube-reinforced copper composites

Fabrication and Properties of Short Carbon Fibers Reinforced Copper Matrix Composites

Study on friction and wear behavior of copper fibers in semimetallic friction materials

Enhancement mechanism of carbon fiber on the current-carrying tribological properties of Cf-Al2O3/Cu composites

Enhanced mechanical and tribological properties of copper matrix composites reinforced by copper-coated graphite and Ti3AlC2

On the tribological behaviors of Cu matrix composites with different Cu-coated graphite content

Influences of B 4 C and carbon nanotubes on friction and wear performance of Cu base self-lubricating composite

Fabrication and tribological behaviors of copper fiber and carbon fiber reinforced phenol‐formaldehyde resin‐based composite for sliding current collector

Friction and Wear Behavior of Copper-Graphite Composite Material in High-Speed Sliding with Current

Understanding friction and wear properties of carbon fiber/epoxy stitched composites

Fabrication and tribological properties of carbon fiber and copper fiber reinforced carbon-based composite by hot pressing

Improvement of thermal conductivity and wear property of Gr/EP composites with CNTs/Cu foam as 3-dimensional reinforcing skeleton

Tribological Properties of Carbon Nanotube-Reinforced Composites

Tribological synergy of copper‐based metal–organic frameworks, carbon fibers and SiO2 in modifying the friction and wear properties of epoxy composites

Superior mechanical properties and wear resistance of copper/graphite metallic composites fabricated with fibrous copper powder

Effect of counterpart materials on tribological behaviors of copper impregnated carbon/carbon composite under electric current condition

Effect of Copper-Plated Graphite Content on the Microstructure and Properties of Copper-Graphite Composites Prepared by Spark Plasma Sintering