Abstract:With the capability to improve indoor air quality while simultaneously reducing energy demand, displacement ventilation is becoming popular. However, the numerical simulation of air distribution in an indoor space with displacement ventilation using computational fluid dynamics (CFD) is challenging because of the complexity of air diffuser geometry and the complicated airflow pattern generated. Typical air diffusers used for displacement ventilation systems include, but are not limited to, quarter-circular-perforated, grille, floor-perforated, and swirl diffusers. None of them can be treated as a simple opening in CFD simulations because their effective area ratios are small. We have developed a new, simple method to describe those diffusers by directly specifying the correct jet momentum from the diffusers while adjusting the airflow rate by changing the effective areas. This is done by setting some CFD cells for a diffuser with a certain momentum, while other cells are randomly blocked. By implementing this method into a commercial CFD program, this study used the method to simulate air distributions in an office and a workshop with those diffusers under cooling or heating conditions. The distributions of air velocity, temperature, and airborne contaminant concentration are in good agreement with the corresponding experimental data obtained from an environmental chamber. Practical implications: This paper presents a simplified method for description of complex diffusers in computational fluid dynamics simulation of displacement ventilation at high computational efficiency. It may be used to assist the design and analysis of air distribution for displacement ventilation as well as other types of ventilation with complex diffusers.

Numerical Analysis on the Application of Displacement Ventilation in Cigarette Factory

Optimization of Ventilation System Operation in Office Environment Using Pod Model Reduction and Genetic Algorithm

Numerical Analysis of Microclimate of Desk Displacement Ventilation Using a Zero-equation Turbulence Model

Numerical simulation and thermal comfort analysis of indoor air distribution in large space buildings

A simplified approach to describe complex diffusers in displacement ventilation for CFD simulations

Air conditioning system of cigarette factories and energy saving research

Optimizing Natural Ventilation Design in A Large Factory Building Using Simulation

Simulation Study On The Energy Comsumption Of Displacement Ventilaiton In Comparison With Mixing Ventilaiton

A system for recovering waste heat from cooling water of technological air conditioner in cigarette factory

Numerical Simulation Of Ventilation Effectiveness In A Hangar

Numerical Simulation on Indoor Thermal Environment of Radiant Flooring Cooling System with Displacement Ventilation

Numerical simulation of air distribution in chair ventilated rooms by simplified methodology

Research on the Cooling Characteristics in Building Interior Zones Using Displacement Ventilation System

Numerical evaluation of the performances of the ventilation system in a blast furnace casthouse

Numerical Study On Indoor Air Distribution For Vav System

Numerical simulation of flow field characteristics and pollutant transport under different ventilation modes

Investigation of Displacement and Jet Ventilation Systems Applied in an Ice Rink

Numerical simulation on transient accessibility of supply air and contaminant source in ventilated room

A Performance Comparison of Three Ventilation Modes in an Office with Internal Partitions

A Numerical Method to Determine the Steady State Distribution of Passive Contaminant in Generic Ventilation Systems.

Optimization Analysis of Natural Ventilation in University Laboratories Based on CFD Simulation