Abstract:C/C–SiC composites with four different preform structures were prepared via chemical vapor infiltration and reactive melt infiltration (RMI). The effects of preform structure on the microstructure and mechanical properties of the C/C–SiC composites were thoroughly investigated. The results indicate that the porous C/C composites with multidirectional long/short fiber‐coupling exhibited consistent pore size distribution (diameter: 5–300 μm) and periodicity pore distribution characteristics. As the effective fiber volume fraction in the loading direction of the C/C–SiC composites increased from 11.71% to 21.04%, the tensile and flexural strength significantly increased by 64.44% and 44.03%, respectively, with minimal effect on compressive and interlaminar shear properties. The introduction of Z‐direction fiber, such as stitched structure, increased the compressive and interlaminar shear strength of the composites by 10.87% and 15.67%, respectively. A theoretical predictive model of ultimate tensile strength after modification was validated for application to the C/C–SiC composites prepared by RMI, through characterization of the volume fraction of each layered unit and the content of each component. However, the presence of defects caused by the stitched structure, such as fiber bending, occupancy, and pores, reduced tensile and flexural strength by 30.45% and 28.56%, thereby impacting the effectiveness of the predictive model negatively.

Preparation and mechanical properties of C/SiC composites with carbon fiber woven preform

Microstructure and Properties of Needle Punching Chopped Carbon Fiber Reinforced Carbon and Silicon Carbide Dual Matrix Composite

Microstructure Evolution and Mechanical Properties of C/C-SiC Composites Prepared with Different Prefabricated Structures

Preparation and Properties of Continuous Carbon Fiber-Reinforced Silicon Carbide Composites

Carbon/silicon Carbide Composites Prepared by Chemical Vapor Infiltration Combined with Silicon Melt Infiltration

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Carbon/carbon composites preparation by novel technology and its characteristic

Three-dimensional carbon silicon carbide composites prepared by chemical vapor infiltration

Mechanical properties of C/C-SiC composites by compression molding

Preparation and Mechanical Properties of C/C-SiC Composites

Fabrication of SiCf/SiC Composites by Chemical Vapor Infiltration and Vapor Silicon Infiltration

Mechanical Properties of a 3D Needled C/SiC Composite with Graphite Filler

Mechanical properties and fracture behavior of CVI-SiC/TaC modified C/C composite

Study of the Infiltration and Mechanical Behavior of C/C Composites Prepared by ECVI

Effects of preform structure on microstructure and mechanical properties of long/short fiber‐coupled C/C–SiC composites

Processing and Ablation Properties of C/SiC-(W-C) Composites

MICROSTRUCTURE AND PROPERTIES OF SICP/SIC COMPOSITE MANUFACTURED BY CVI

Mechanical Properties of 3D Fiber Reinforced C/SiC Composites

Microstructure and mechanical properties of 3D needled carbon fibre reinforced carbon and silicon carbide composites

Enhanced Densification and Mechanical Properties of Carbon Fiber Reinforced Silicon Carbide Matrix Composites Via Laser Machining Aided Chemical Vapor Infiltration

Influence of Preparation Method on Microstructure and Tribological Properties of C/C-SiC Composites