Abstract:Magnetic invisible cloaking has been previously demonstrated but only limited to objects with rotational geometries either in spherical or cylindrical shapes, for which the classic analytical bilayer scheme could be strictly applied to design the hiding coat. In this work, we show that a quasi-static cloaking effect could be achieved for irregular objects, e.g., metals with sharp edges, using a numerical optimization scheme. In the quasi-static limit, it is unambiguously proved that the disturbance of the irregular geometries could be well compensated by the inhomogeneous distribution of the soft ferromagnetic (FM) layer either in permeability values or in shapes under the framework of a bilayer cloak. An FM mesh coat with a constant thickness of 0.5 mm was successfully engineered to meet the specific requirements. Experimentally, good cloaking performance with a field disturbance of less than 0.5% has been achieved for a 2 × 2 × 5 cm3 brass bar in a wide frequency range from ∼10 to 250 kHz. A commercial metal scanner was also applied to verify the practical potential. The general strategy to hide almost arbitrary objects was discussed in the end. In principle, the numerical conformal coat engineered by the composite material proposed here could be broadly extended for objects with various geometries.

The Simplified Material Parameter Equation for Elliptical Cylinder Cloaks

Material Parameter Equation for Elliptical Cylindrical Cloaks

Material Parameter Equation for Rotating Elliptical Spherical Cloaks

Acoustic Elliptical Cylindrical Cloaks

Design and Study of Elliptical Cylinder External Cloak Based on Line-Transformation

Ultrathin Conformal Magnetic Invisible Cloak for Irregular Objects.

Experimentally Demonstrated A Unidirectional Electromagnetic Cloak Designed by Topology Optimization

The Scattering of a Cylindrical Invisibility Cloak: Reduced Parameters and Optimization

Material Parameters Characterization For Three-Dimensional Pyramidal Cloak

Cylindrical Invisibility Cloak With Simplified Material Parameters Is Inherently Visible

Derivation of the Material Parameters for Regular N-Sided Polygonal Cylindrical Cloak and the Invisibility Verification

The design of metamaterial cloaks embedded in anisotropic medium

Area-Transformation Method for Designing Invisible Cloaks

Cylindrical Cloak with Axial Permittivity/permeability Spatially Invariant

Design and study of the two-dimensional ellptical scattering-shifting cloak

Route to Low-Scattering Cylindrical Cloaks with Finite Permittivity and Permeability

A Unidirectional TM-Wave Cloak with Full Parameters

Complementary medium cylindrical cloak with spatially invariant axial material parameters

Electromagnetic Characteristics of Metamaterial Cloak Covered Dielectric Cylinder Illuminated by Electric Line Source

Near/Far field properties of the metamaterial cylindrical cloak illuminated by the electric line source

Optimized Cylindrical Invisibility Cloak with Minimum Layers of Non-Magnetic Isotropic Materials