Abstract:Magnetic invisible cloaking has been previously demonstrated but only limited to objects with rotational geometries either in spherical or cylindrical shapes, for which the classic analytical bilayer scheme could be strictly applied to design the hiding coat. In this work, we show that a quasi-static cloaking effect could be achieved for irregular objects, e.g., metals with sharp edges, using a numerical optimization scheme. In the quasi-static limit, it is unambiguously proved that the disturbance of the irregular geometries could be well compensated by the inhomogeneous distribution of the soft ferromagnetic (FM) layer either in permeability values or in shapes under the framework of a bilayer cloak. An FM mesh coat with a constant thickness of 0.5 mm was successfully engineered to meet the specific requirements. Experimentally, good cloaking performance with a field disturbance of less than 0.5% has been achieved for a 2 × 2 × 5 cm3 brass bar in a wide frequency range from ∼10 to 250 kHz. A commercial metal scanner was also applied to verify the practical potential. The general strategy to hide almost arbitrary objects was discussed in the end. In principle, the numerical conformal coat engineered by the composite material proposed here could be broadly extended for objects with various geometries.

Material Parameter Equation for Rotating Elliptical Spherical Cloaks

Material Parameter Equation for Elliptical Cylindrical Cloaks

The Simplified Material Parameter Equation for Elliptical Cylinder Cloaks

Cylindrical Cloak with Axial Permittivity/permeability Spatially Invariant

Acoustic Elliptical Cylindrical Cloaks

Derivation of the Material Parameters for Regular N-Sided Polygonal Cylindrical Cloak and the Invisibility Verification

Experimentally Demonstrated A Unidirectional Electromagnetic Cloak Designed by Topology Optimization

Area-Transformation Method for Designing Invisible Cloaks

Ultrathin Conformal Magnetic Invisible Cloak for Irregular Objects.

The Scattering of a Cylindrical Invisibility Cloak: Reduced Parameters and Optimization

Design and Study of Elliptical Cylinder External Cloak Based on Line-Transformation

The design of metamaterial cloaks embedded in anisotropic medium

Material Parameters Characterization For Three-Dimensional Pyramidal Cloak

Near/Far field properties of the metamaterial cylindrical cloak illuminated by the electric line source

A Rigorous Analysis of Plane-Transformed Invisibility Cloaks

Investigation of the Far/Near-Field Properties of the Inhomogeneous and Anisotropic Invisible Cloak Covered Pec Cylinder Illuminated by the Parallel Electric-Line-Source

Design Method for Electromagnetic Cloak with Arbitrary Shapes Based on Laplace's Equation

Analysis on a Perfect Cylindrical Cloak Realizable with Two Dimensional Metamaterials

Developing and Analyzing Some Novel Finite Element Schemes for the Electromagnetic Rotation Cloak Model

A Unidirectional TM-Wave Cloak with Full Parameters

Research on electromagnetic dispersion characteristics of cylindrical invisibility cloaking for missile