Abstract:Two methods are presented to obtain optimal inverse kinematic solutions for redundant manipulators, according to two different performance criteria stipulated in the position and velocity levels. Both methods are analytical throughout except their final stages, which involve the numerical solution of a simplified minimization problem in a position-level case and the numerical integration of a set of differential equations derived optimally in a velocity-level case. Owing to the analytical nature of the methods, the multiple and singular configurations of the manipulator of concern can be identified readily and studied in detail. The methods are applicable for both serial and parallel redundant manipulators. However, they are demonstrated here for a humanoid manipulator with seven revolute joints. In the demonstrations, the first performance criterion is stipulated in the position level as the minimization of the potential energy. In that case, the optimal inverse kinematic solution is first obtained in the position level for a specified position of the hand. Then, it is compatibly extended to the velocity level for a specified motion of the hand. In the main analytical part of the solution, six of the joint variables are expressed in terms of the selected seventh one. Then, the optimal value of the selected joint variable is determined numerically by a simple one dimensional scanning. The second performance criterion is stipulated in the velocity level as the minimization of the kinetic energy. In that case, the optimal inverse kinematic solution is first obtained in the velocity level and then extended to the position level by integration. The main analytical part of the solution provides an optimally determined set of nonlinear differential equations. These differential equations are then integrated numerically in order to obtain the corresponding solution in the position level. However, the corrections needed to eliminate the numerical integration errors are still obtained analytically. The distinct optimal behaviors of the manipulator according to the mentioned criteria are also illustrated and compared for a duration, in which the hand moves in the same specified way.

Minimizing Joint‐torques of the Flexible Redundant Manipulator on the Premise of Vibration Suppression

A Dynamic Optimization Approach Of Flexible Redundant Manipulators For Vibration Reducing And Torque Minimization

On the Virtual Joints for Kinematic Control of Redundant Manipulators with Multiple Constraints

Adaptive Robust Posture Control of A Pneumatic Muscles Driven Parallel Manipulator with Redundancy

Active Torsional Vibration Control of Flexible Manipulator

Clamping Weighted Least-Norm Method for the Manipulator Kinematic Control with Constraints.

Optimal Task-Space Tracking with Minimum Manipulator Reconfiguration

A Unified Weighted Least Norm Method For Redundant Manipulator Control

Torque Limitation Control of Industrial Manipulators Based on General Weighted Least Norm Method

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Decoupled Dynamic Model and Control of Flexible Space Manipulator

The Nonholonomic Redundancy of Second-Order Nonholonomic Mechanical Systems

Torque optimization method of a 3-DOF redundant parallel manipulator based on actuator torque range

An Iterative Path-Following Method for Hyper-Redundant Snake-Like Manipulator with Joint Limits.

Vibration Suppression of a High-Speed Flexible Parallel Manipulator Based on Its Inverse Dynamics

Dynamic Modeling and Optimization Analysis of Rigid–Flexible Coupling Manipulator Based on Assumed Mode Method

Dynamic Manipulability and Optimization of a Redundant Three DOF Planar Parallel Manipulator

Optimal Inverse Kinematic Solutions for Redundant Manipulators by Using Analytical Methods to Minimize Position and Velocity Measures

Model-Free Control of Flexible Manipulator Based on Intrinsic Design

Active control of bending-torsion-coupled vibration of a space flexible manipulator

Dynamic Modeling and Vibration Characteristics Analysis of Flexible-Link and Flexible-Joint Space Manipulator