Abstract:Two methods are presented to obtain optimal inverse kinematic solutions for redundant manipulators, according to two different performance criteria stipulated in the position and velocity levels. Both methods are analytical throughout except their final stages, which involve the numerical solution of a simplified minimization problem in a position-level case and the numerical integration of a set of differential equations derived optimally in a velocity-level case. Owing to the analytical nature of the methods, the multiple and singular configurations of the manipulator of concern can be identified readily and studied in detail. The methods are applicable for both serial and parallel redundant manipulators. However, they are demonstrated here for a humanoid manipulator with seven revolute joints. In the demonstrations, the first performance criterion is stipulated in the position level as the minimization of the potential energy. In that case, the optimal inverse kinematic solution is first obtained in the position level for a specified position of the hand. Then, it is compatibly extended to the velocity level for a specified motion of the hand. In the main analytical part of the solution, six of the joint variables are expressed in terms of the selected seventh one. Then, the optimal value of the selected joint variable is determined numerically by a simple one dimensional scanning. The second performance criterion is stipulated in the velocity level as the minimization of the kinetic energy. In that case, the optimal inverse kinematic solution is first obtained in the velocity level and then extended to the position level by integration. The main analytical part of the solution provides an optimally determined set of nonlinear differential equations. These differential equations are then integrated numerically in order to obtain the corresponding solution in the position level. However, the corrections needed to eliminate the numerical integration errors are still obtained analytically. The distinct optimal behaviors of the manipulator according to the mentioned criteria are also illustrated and compared for a duration, in which the hand moves in the same specified way.

The Nonholonomic Redundancy of Second-Order Nonholonomic Mechanical Systems

A Unified Approach for Second-Order Control of the Manipulator With Joint Physical Constraints

Adaptive Robust Posture Control of A Pneumatic Muscles Driven Parallel Manipulator with Redundancy

A Unified Weighted Least Norm Method For Redundant Manipulator Control

On the Virtual Joints for Kinematic Control of Redundant Manipulators with Multiple Constraints

General-Weighted Least-Norm Control for Redundant Manipulators

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Dynamics and Control of a Novel 3 -DOF Parallel Manipulator with Actuation Redundancy.

Stabilizing the Second-Order Nonholonomic Systems with Chained Form by Finite-Time Stabilizing Controllers

A Kinematics Control Scheme of Redundant Manipulators Under Unknown Loads or External Forces

A Dynamic Optimization Approach Of Flexible Redundant Manipulators For Vibration Reducing And Torque Minimization

Adaptive neural-network control for redundant nonholonomic mobile modular manipulators

A Spatial Path Following Method for Hyper-Redundant Manipulators by Step-by-Step Search and Calculating

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

A Discrete Model-Free Scheme for Fault Tolerant Tracking Control of Redundant Manipulators

Motion Control Strategy of Redundant Manipulators Based on Dynamic Task-Priority.

Optimal Inverse Kinematic Solutions for Redundant Manipulators by Using Analytical Methods to Minimize Position and Velocity Measures

Characteristics Analysis and Stabilization of A Planar 2r Underactuated Manipulator

Accurate Position and Posture Control of a Redundant Hexapod Robot

Enhancing kinematic accuracy of redundant wheeled mobile manipulators via adaptive motion planning

Model-free kinematic control of redundant manipulators with simultaneous joint-physical-limit and joint-angular-drift handling