Abstract:Chitosan is a promising adsorbent for removing a wide range of pollutants from wastewater. However, its practical application is hindered by instability in acidic environments, which significantly impairs its adsorption capacity and limits its utilization in water purification. While cross-linking can enhance the acid stability of chitosan, current solvent-based methods are often costly and environmentally unfriendly. In this study, a solvent-free mechanochemical process was developed using high-energy ball milling to cross-link chitosan with various polyanionic linkers, including dextran sulfate (DS), poly[4-styrenesulfonic acid-co-maleic acid] (PSSM), and tripolyphosphate (TPP). The mechanochemically cross-linked (MCCL) chitosan products exhibited superior adsorption capacity and stability in acidic solutions compared to pristine chitosan. Chitosan cross-linked with DS (Cht-DS) showed the highest Reactive Red 2 (RR2) adsorption capacity, reaching 1559 mg·g−1 at pH 3, followed by Cht-PSSM (1352 mg·g−1) and Cht-TPP (1074 mg·g−1). The stability of MCCL chitosan was visually confirmed by the negligible mass loss of Cht-DS and Cht-PSSM tablets in pH 3 solution, unlike the complete dissolution of the pristine chitosan tablet. The MCCL significantly increased the microhardness of chitosan, with the order Cht-DS > Cht-PSSM > Cht-TPP, consistent with the RR2 adsorption capacity. When tested on simulated rinsing wastewater from chromium electroplating, Cht-DS effectively removed Cr(VI) (98.75% removal) and three per- and polyfluoroalkyl substances (87.40–95.87% removal), following pseudo-second-order adsorption kinetics. This study demonstrates the potential of the cost-effective and scalable MCCL approach to produce chitosan-based adsorbents with enhanced stability, mechanical strength, and adsorption performance for treating highly acidic industrial wastewater containing a mixture of toxic pollutants.

Study on soften of hard water by chitosan

The effect of water states on mechanical properties of 3-dimensional chitosan materials

Superadsorption of LiOH Solution on Chitosan As a New Type of Solvent for Chitosan by Freezing/blasting

Chitosan-LiOH-urea Aqueous Solution—a Novel Water-Based System for Chitosan Processing

Preparation and Structure of Chitosan Swellable in Alkali Solution by Ultrasonic Treatment

Study on optimization of ultrasonic wave-assisted extraction of chitin from shrimp shell

Preparation and structure of chitosan soluble in wide pH range

Preparation and characterization of chitosan from crab shell (Portunus trituberculatus) by NaOH/urea solution freeze-thaw pretreatment procedure

Preparation of Alkali Swelling Chitosan and Its Freezing-Swelling Behaviour

Study on Extraction Technology of Chitin from Local Shrimp and Crab Shell

Preparation of salt-tolerant chitosan hydrogels and their anti-biofouling behavior study

Preparation of ultra-light, highly compressible, and biodegradable chitosan porous materials for heavy metal adsorption, dye adsorption and oil-water separation

Removal of Hardness using Coconut Shell Carbon

An Evaluation of the Corrosion Inhibition Performance of Chitosan Modified by Quaternary Ammonium Salt for Carbon Steel in Stone Processing Wastewater

Preparation and Characterization of Chitosan Amino Acid Salts

Physicochemical characteristics of chitosan from swimming crab (Portunus trituberculatus) shells prepared by subcritical water pretreatment

Improvement of chitosan water solubility by fumaric acid modification

Synthesis Of Spherical Chitosan-Zeolite Composite (Ch-Z Spherical) From Shrimp Shells Using Crosslinking Method As Adsorbent Of Metal Ca (Ii) And Mg (Ii)

Application of chitosan as flocculant for coprecipitation of Mn(II) and suspended solids from dual-alkali FGD regenerating process.

Defluoridation of water using neodymium-modified chitosan

Mechanochemical Synthesis of Cross-Linked Chitosan and Its Application as Adsorbent for Removal of Per- and Polyfluoroalkyl Substances from Simulated Electroplating Wastewater