Abstract:In this work, a novel internal heat absorption technology using inorganic material rods is employed during the solidification process of steel ingots, aiming to control their solidification and improve the quality of the final product. The study investigates the effect of the insertion depth of inorganic materials on the solidification microstructure and macrosegregation of 2.5-ton 42CrMo ingots. The mechanical properties of samples from the product are also tested. A numerical simulation model for casting 2.5-ton ingots is established and implemented in Ansys Fluent fluid simulation software, with inorganic material rods set at different preset depths. The simulation explores the physical processes of the melting and floating of inorganic materials in molten steel, as well as their effects on the temperature and flow fields of the material. The results show that deeper insertion of inorganic materials (200 mm from the hot top) reduces the tendency for macrosegregation compared to that at the insertion depth of 100 mm. Specifically, the positive segregation area decreases by 10.35%, while the negative segregation area decreases by 15.32%. Moreover, deeper insertion results in a significant refinement of the solidification microstructure, ultimately enhancing the mechanical properties of the products machined from the ingots (i.e., the yield strength increased by 4.7%). The numerical simulation results indicate that as the placement depth of inorganic materials in the ingot mold increases, the cooling effect becomes more significant, the flow area of molten steel initiated by the inorganic materials expands, and the linear velocity of the double-circle flow increases. This further explains why the solidification quality of the ingots improves with the increasing placement depth of inorganic materials.

Research on Casting Defects of 30Cr2Ni4MoV Heavy Steel Ingot

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Microstructure Refinement and Crack Initiation in the Forging Process

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Investigation on Surface Defects Produced in Pretreatment of Die-casting AM60B Magnesium Alloy

A review on prediction of casting defects in steel ingots: from macrosegregation to multi-defect model

Numerical Simulation of Central Shrinkage Crack Formation in a 234-T Steel Ingot

Advance in Research of Casting Defects of Directionally Solidified Nickel-based Single Superalloys

Simulation of Temperature Field and Microstructure in Heavy Steel Ingots Solidification

Modeling and Numerical Simulation Research on Hollow Steel Ingot Forging Process of Heavy Cylinder Forging

Research on Heavy Hollow Ingot Forging Process

The Influence of Insertion Depth of Inorganic Materials on Solidification Microstructure and Segregation of 2.5-ton 42CrMo Ingot

Research on clogging mechanism of tundish submerged nozzle for 38CrMoAl steel

Effects of Deformation Penetration and Recrystallization on the Internal Quality of Casting Ingot

Analysis of metallurgical defects in enamel steel castings

Investigation on hollow steel ingot forging process of heavy cylinder forging

Evolution of Dendrite Structure and Shrinkage Porosity in 30Cr15Mo1N Ingot with Pouring Rate

Multi-scale Modeling of Solidification Process of Ni-based Superalloy Investment Castings

Internal Shrinkage Crack in a 10 T Water-Cooled Steel Ingot with a Large Height-to-diameter Ratio

Simulating Study on the Shrinkage Cavity and Porosity of a Microalloyed Steel Ingot

Numerical Simulation of Influence of Vertical Continuous Casting Process Parameters on Heat Transfer and Mold Stress of C71500 Large Diameter Hollow Ingot