Abstract:Mesoporous carbon materials with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2,3-dihydroxynaphthalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)(2)center dot 6H(2)O] solution in 2-propanol, which was added to the carbon-silica nanocomposite prior to thermal treatment. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 degrees C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM), and in situ electron diffraction X-ray spectroscopy (EDX). While TG analysis revealed carbon contents lower than 30 wt.-%, nitrogen adsorption provided information about the homogeneity of the carbon thin film deposited onto the mesopore walls of the ordered silica templates SBA-15. The templates, carbon-silica nanocomposites, and carbon inverse replicas with nickel nanoparticles exhibit uniform pores, high surface areas, and large pore volumes. Partially graphitic carbon was identified by the presence of a characteristic G band in the Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD. The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles are uniform in size, ca. 3 nm, and are homogeneously dispersed on the tubular carbon walls. A few larger clusters of nickel, ca. 60 nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles are largely composed of Ni with traces of NiO. Similar nanoparticle dispersions have been reported only for Ni-containing multiwalled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbon materials, CMK-3, possess larger Ni/NiO nanoparticles. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009)

A New Method for Preparing Nickel Oxide Supported Silica Pillared Phosphates with High Surface Area

Preparation and characterization of metal oxide supported silica pillared zirconium phosphates with high surface area

PREPARATION OF NiO NANOPARTICLES ON THE SILICA SURFACE BY ADSORPTION PHASE SYNTHESIS AND ITS REGULATION ON MORPHOLOGY OF NiO PARTICLES

Preparation and Catalytic Behaviour of Cr2o3-Pillared Tin Phosphate with High Surface Area

Silica-based mixed oxide pillared layered α-zirconium phosphates

A New Way to Prepare Some Supported Catalysts with Highly Specific Surfaces

Alumina-pillared Α-Zirconium Phosphate Prepared by In-Situ Polymerization Method

Preparation and catalytic properties of chromia-pillared α-zirconium phosphate

Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Preparation of High-Surface-Area Sno2 and Zro2 by Reflux-Digestion and Solvothermal Methods

Planting of Bis(1,5-Cyclooctadiene) Nickel Upon Silica to Harvest NiO (<5 Nm) Nanoparticles in a Silica Matrix

Preparation of Silica-Pillared Layered Tetratitanate with a High Surface Area

A Novel Way to Prepare TiO2 and Γ‐al2o3 Supported Catalysts with Large Surface Areas

Preparation of Ultrafine Ce-Zr-Ba Mixed Oxide Powder with High Surface Area

Preparation of Nanocrystalline Metal Oxide Powders with the Surfactant-Mediated Method

Synthesis and characterization of high surface area molybdenum phosphide

Preparation of Highly Dispersed Nickel Phosphide Catalyst Supported on Nano-Sized Y Zeolite and Its Hydrodesulfurization Performance

Surface Functionalization of Mesoporous Silica Sba-15 by Liquid-Phase Grafting of Zirconium Phosphate

Preparation and characterization of high specific surface area Ce 0.5Zr0.5O2 mixed oxide

A Versatile Route to Synthesizing Bulk and Supported Nickel Phosphides by Thermal Treatment of a Mechanical Mixing of Nickel Chloride and Sodium Hypophosphite

An Approach to Preparing Highly Dispersed Ni2P/SiO2 Catalyst