Abstract:In this paper, a novel on-chip circuit design approach is proposed using hybrid coupling technique. Taking advantage of this technique, a microwave bandpass filter (BPF) is proposed as a design example for proof of concept. Based on stub-loaded stepped-impedance transmission lines and folded stepped-impedance meander line from different metal layers, the proposed BPF can generate three transmission zeros (TZs) and two transmission poles (TPs), which are excited through the hybrid mutual couplings between the inductive and capacitive metals. To understand the principle of this configuration, an equivalent LC-circuit model is presented and simplified, of which the TZs and TPs of the proposed BPF are estimated by the extracted transfer function. The calculated results exhibit good agreements with the simulated and measured ones. In addition, the bandwidth and center frequency of the proposed BPF can be tuned flexibly. Finally, to further demonstrate the feasibility of this approach in practice, the structure is implemented and fabricated in a commercial 0.13-mu mSiGe (Bi)-CMOS technology. The measurement results show that the proposed BPF, whose chip size is 0.39 mm x 0.45 mm (excluding the test pads), can realize a wide bandwidth from 19.7 to 33.2 GHz with a return loss of 15.8 dB and insertion loss of 3.8 dB at the center frequency of 26.5 GHz.

Design of a Novel Bandpass Filter in Millimeter-Wave Band

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Novel Microstrip Dual-Band Bandpass Filter with Wide Stopband and High Isolation

Microwave On-Chip Bandpass Filter Based on Hybrid Coupling Technique

Compact Microstrip Narrowband Bandpass Filter Using Multipath Coupling Configuration

A Novel C-Band Bandpass Microstrip Filter Using Stubline Coupling

Design of Millimeter-Wave Bandpass Filter Using Edge-Coupling Dual-Mode Resonator

Design of a novel compact wideband bandpass filter with shunt open-circuited stubs

Miniaturized Mixed-Cross Coupling Bandpass Filter with Source–load Coupling

A Novel Hybrid Microstrip/Slotline Transversal Wide-Band Bandpass Filter

Compact Bandpass Filter with Improved Stopband Characteristics Using S-L Coupling

Novel Design of Microstrip Bandpass Filters with a Controllable Dual-Passband Response: Description and Implementation.

Novel Compact Dual-Band BPF Using Stub-Loaded Shorted Stepped-Impedance Resonators

A Novel Quad-Band Bandpass Filter Using Short Stub Loaded E-Shaped Resonators

A Microstrip Bandpass Filter Based on Novel Resonators

Design Of Enhanced Stopband Bandpass Filter With Mixed Electric And Magnetic Coupling

A Compact Wideband Bandpass Filter Based on Parallel-Coupled Stub-Loaded Resonator

Miniature Microstrip Bandpass Filter Using Resonator-Embedded Dual-Mode Resonator Based on Source-Load Coupling

A compact bandpass filter based on substrate integrated waveguide and spoof surface plasmon polaritons for millimeter-wave applications

Miniaturized Circular Substrate Integrated Waveguide Bandpass Filter With Flexible Mixed Coupling and Wide Stopband Rejection

Novel Broadband Bandpass Filters Using Y-Shaped Dual-Mode Microstrip Resonators