Abstract:A key issue in designing and optimizing Stirling engines is to build a precise thermodynamic model to predict the output power, thermal efficiency, and detailed performance properties and provide useful information for further improvement. In this study, a thermodynamic model called Improved Simple Analytical Model (ISAM) was proposed, carefully considering heat and power losses in Stirling engines. A 100 W beta-type Stirling engine was built and tested with helium and nitrogen when pressure and rotary speed ranging from 1.6 MPa to 3 MPa and 260 r/min to 1380 rimin, respectively. Experimental information on performance, such as PV diagrams and temperatures of the heater and cooler, was much detailed. Increasing rotary speed brings a "thin" PV diagram because it made compression and expansion processes become more imperfect, indicating heat transfer enhancement was necessary for compression and expansion chamber in a high speed Stirling engine. Shaft power reached the maximum value of 30.1 W for helium and 21.0 W for nitrogen at rotary speeds of 1000 r/min and 650 r/min, respectively. Improving the mean pressure of gas increased the indicated power, cycle efficiency, shaft power, and electrical power. The maximum indicated power and cycle efficiency were 165 W and 16.5% for helium and 139 W and 12.2% for nitrogen in the same working conditions of 2.96 MPa and 1120 r/min. The ISAM agrees well with the experimental data with a deviation of 4.3-13.4% for helium and 1-7.1% for nitrogen. Analysis of energy losses with ISAM indicated that helium had larger shuttle and seal leakage losses and smaller flow resistance and regenerator heat transfer losses than nitrogen under the same working conditions. Flow resistance and regenerator heat transfer losses, which increased much more rapidly than seal leakage or shuttle heat losses with the increase in rotary speed and pressure, played an important role and resulted in different performances with the two working gases. This study provides comprehensive understanding of the influence mechanism of rotary speed, pressure and working gas in the view of heat/power losses for Stirling engine performance, and recommends that more work (e.g., mechanisms of heat and power losses and PV diagrams) should be performed to improve the precision of second-order models. (C) 2016 Elsevier Ltd. All rights reserved.

MODIFICATION AND PERFORMANCE TEST OF AN 1kW α TYPE STIRLING ENGINE

Experimental investigation to evaluate the performance profile of a small-scale standalone concentrated solar parabolic dish Stirling system

Improvement of a Stirling type two-stage pulse tube cryocooler

Thermoacoustically Driven Pulse Tube Cooler below 60K

Working Mechanism and Characteristics of Gas Parcels in the Stirling Cycle

THE PRIMARY EXPERIMENT OF PERFORMANCE OF SMALL SCALE STIRLING ENGINE IN DIFFERENT EXTERNAL HEAT SUPPLY

Performance study of 1.5 kWe free piston Stirling generator emulating solar power working conditions

Numerical simulation on heat transfer enhancement of free piston Stirling engine heater with composite cross section mini channels

Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy

A Third-Order Numerical Model and Transient Characterization of a Β-Type Stirling Engine

Dynamic and thermodynamic characterization of a resonance tube-coupled free-piston Stirling engine-based combined cooling and power system

Performance analysis of different arrangements of a new layout dish-Stirling system

Cool Down Time Optimization of the Stirling Cooler

Numerical study on a multi-unit heat-driven double-acting free-piston Stirling heat pump system

Improved Simple Analytical Model and Experimental Study of a 100W Β-Type Stirling Engine

Constructal Design of Biogas Fired Stirling Engine-Based Micro Combined Heat and Power System Using a Novel Polytropic Endothermic/exothermic Thermal Model

Solar Hybrid Steam-Injected Gas Turbine System with Novel Heat and Water Recovery

Design Optimization with Computational Fluid Dynamic Analysis of Β-Type Stirling Engine

Evaluation of heat transfer enhancement effect at the hot/cold end of a Stirling engine using performance improvement factor

Performance analysis and multi-objective optimization based on a modified irreversible Stirling cycle

Effect of Material Change on Stirnol Engine: A Combination of NiTiNOL (Shape Memory Alloy) and Gamma Stirling Engine