Abstract:Synthesis methods of composites. Copper‐based metal–organic frameworks is anticipated to find applications in the field of friction materials owing to its plentiful surface‐active groups and distinctive framework structure. In this study, copper‐based metal–organic frameworks was synthesized through ultrasound‐assisted method and incorporated alone into carbon fiber reinforced epoxy composites or together with SiO2 nanoparticles towards the goal of improving the composites' friction and wear properties. It is revealed that copper‐based metal–organic frameworks alone cannot improve the friction and wear of carbon fiber reinforced epoxy composites simultaneously. The combination of copper‐based metal–organic frameworks and SiO2 nanoparticles was more effective in enhancing both the mechanical and tribological properties of studied composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s. Additionally, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3 N/m. Through morphological and chemical analysis on the worn surfaces and transfer films, the functioning mechanism of copper‐based metal–organic frameworks in modifying the mechanical and tribological properties was discussed. It was discovered that a tribological synergy exists between short carbon fibers, copper‐based metal–organic frameworks, and SiO2 fillers, leading to a shift in the wear mechanism of the composite materials from abrasive wear to adhesive wear. Concurrently, a shear‐prone transfer film forms on the surface of the counter steel surfaces. Findings of the present study pave a new route of designing high performance epoxy based tribo‐composites by using metal–organic frameworks. Highlights Cu‐BDC nanosheets were synthesized using ultrasound‐assisted techniques and incorporated as tribological fillers in EP composites. The combined use of Cu‐BDC, SiO2, and SCF fillers synergistically enhances the mechanical and tribological properties of EP composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3N/m. During the sliding friction process of the composite materials, Cu‐BDC and SiO2 play a crucial role in reducing SCF pull‐out wear through their anchoring effect. The dynamic coordination bond structure of Cu‐BDC contributes to the formation of uniform and continuous transfer films on counter metal surfaces.

Microstructural Investigation on Antifriction Characteristics of Self-Lubricating Copper Hybrid Composite

Intuitive Analysis of the Microtribological Behavior of Copper-Coated Graphite–Graphite/Cu Composites with High Graphite Contents

Tribological Behavior and Lubrication Mechanism of Self-Lubricating Ceramic/Metal Composites: the Effect of Matrix Type on the Friction and Wear Properties

The Development of a Cu@Graphite Solid Lubricant with Excellent Anti-Friction and Wear Resistant Performances in Dry Condition

Influences Of Counterface Materials And Reinforcement On The Sliding Wear Of Copper Matrix Composites

Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials

Self-lubrication Behavior of the Reaction-Formed Graphite/sic Composites with Optimizing Graphite Content

Enhancement of Tribological Properties in Siliconized Graphite Via Hierarchically Hybrid SiC/C Composite

Microstructure and Tribological Properties of Copper/graphite Composites with Ti3AlC2 Addition Prepared by Rapid Hot Press Sintering

Research on Synergistic Lubrication Effect of Silver Modified Cu–Ni-graphite Composite

Tribological Behavior of Cu Matrix Composites Containing Graphite and Tungsten Disulfide

Effect of adding copper-plated graphite on the organization and wear reduction of copper-nickel alloy composite coatings

Study on the tribological properties of MoB/Cu laminated composite materials fabricated by hot-pressing process

Study on the Tribological Performance of Copper-Based Powder Metallurgical Friction Materials with Cu-Coated or Uncoated Graphite Particles as Lubricants

Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

Improving the Mechanical and Tribological Behavior of Cu-WS2 Self-Lubricating Composite with the Addition of WS2 Nanosheet

Wear Mechanism and Three-phase Synergistic Effect of Self-mated SiC/Si/Graphite Composites in Unlubricated Sliding

The tribological behaviour of electroless Ni–P–Gr–SiC composite

Characterization and Tribological Properties of Graphene/Copper Composites Fabricated by Electroless Plating and Powder Metallurgy

Fabrication and Tribological Properties of Mesocarbon Microbead–Cu Friction Composites

Tribological synergy of copper‐based metal–organic frameworks, carbon fibers and SiO2 in modifying the friction and wear properties of epoxy composites