Abstract:Water plays a critical role on the performance, stability and lifetime of proton exchange membrane fuel cells(PEMFCs). The addition of poly tetrafluoroethylene(PTFE) to the gas diffusion layer, especially, the cathode side, would optimize the transportation of water, electron and gas and thus improve the performance of the fuel cell. But until now, the studies about directly applying the PTFE to the catalyst layer are rarely reported. In this paper, the membrane electrode is fabricated by using directly coating catalyst to the membrane method(CCM) and applying PTFE directly to the cathode electrode catalyst layer. The performance of the single cell is determined by polarization curves and durability tests. Electrochemical impedance spectroscopy(EIS) and scanning electron microscopy(SEM) techniques are used to characterize the electrochemical properties of PEMFC. Also the performance of a 10-cells stack is detected. Combining the performance and the physical-chemistry characterization of PEMFC shows that addition of appropriate content of PTFE to the electrode enhances the performance of the fuel cell, which may be due to the improved water management. Addition of appropriate content of PTFE enhances the interaction between the membrane and the catalyst layer, and bigger pores and highly textured structure form in the MEA, which favors the oxygen mass transfer and protons transfer in the fuel cell. While superfluous addition of PTFE covers the surface of catalysts and hindered the contact of catalyst with Nafion, which leads to the reduction of electrochemical active area and the decay of the fuel cell performance. The proposed research would optimize the water management of the fuel cell and thus improve the performance of the fuel cell.

Improving the DMFC Performance with Ketjen Black EC 300J As the Additive in the Cathode Catalyst Layer

Improving the Performance of A Pemfc with Ketjenblack Ec-600jd Carbon Black As the Material of the Microporous Layer

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

(Digital Presentation) Effects of Catalyst Dimension Parameters on Local Oxygen Transport in Cathode Catalyst Layer of Proton Exchange Membrane Fuel Cell

Enhanced PEMFC Durability with Graphitized Carbon Black Cathode Catalyst Supports under Accelerated Stress Testing.

Performance Improvement in Direct Methanol Fuel Cell Cathode Using High Mesoporous Area Catalyst Support

Optimization of Cathode Microporous Layer Materials for Proton Exchange Membrane Fuel Cell

Influence of PTFE on Electrode Structure for Performance of PEMFC and 10-Cells Stack

Effect of Ionomer Content on Cathode Catalyst Layer for PEMFC Via Molecular Dynamics Simulations and Experiments

Structure and performance of the cathode with double-layered catalyst layer for direct methanol fuel cell

Effect of Different Structures of Carbon Supports for Cathode Catalyst on Performance of Direct Methanol Fuel Cell

Direct Methanol Fuel Cells: the Effect of Electrode Fabrication Procedure on Meas Structural Properties and Cell Performance

Improved DMFC water management via superwetting, high-performance catalyst synthesized by nanocapsule method

Improving Cell Performance and Alleviating Performance Degradation by Constructing a Novel Structure of Membrane Electrode Assembly (MEA) of DMFCs

Enhanced MEA Performance for PEMFCs under Low Relative Humidity and Low Oxygen Content Conditions Via Catalyst Functionalization

Enhanced Water Management Via the Optimization of Cathode Microporous Layer Using 3D Graphene Frameworks for Direct Methanol Fuel Cell

Performance and Mass Transfer Characteristics of an Air-Breathing DMFC

Effect of Lamination Between the Catalyst Layer and Diffusion Layer on the Performance of DMFCs

Improved Performance of Direct Methanol Fuel Cells with Tungsten Carbide Promoted Pt/C Composite Cathode Electrocatalyst

Enhance the Durability of the Oxygen Reduction Reaction Catalyst Through the Synergy of Improved Graphitization and Nitrogen Doping of Carbon Carrier

Effect of a carbon support containing large mesopores on the performance of a Pt-Ru-Ni/C catalyst for direct methanol fuel cells