Abstract:The aim of CO2 enhanced gas recovery (CO2-EGR) is to extract more natural gas from depleted gas reservoirs and simultaneously sequestrate large amount of CO2. To achieve these dual objectives, the optimization of CO2 injection strategy in CO2-EGR is proposed to achieve maximum benefit. Thus, the focus of this work is to study CO2-EGR by numerical simulation and optimization. For this purpose, a 3D reservoir model with 'five-spot' well pattern (an injection well and four production wells) is established for simulations using the multiphase simulator TOUGH2, and the main focus is on optimization of CO2 injection rate and well placements by coupling the genetic algorithm (GA) with TOUGH2. Simulations are performed to determine the optimal injection rate for both two types of injection wells placements, one vertical injection well with number of perforations at various depth and orthogonal horizontal wells on top of the reservoir. The results show that multipoint perforations in the vertical injection well and the horizontal injection wells with appropriate length show improvement in natural gas recovery and CO2 storage compared to the injection location at the reservoir bottom. More importantly, the optimized injection rate determined by GA-TOUGH2 can substantially improve the natural gas recovery factor for both vertical and horizontal well injection. After computing a number of optimized cases, it's shown that the case employing the horizontal injection wells with optimized injection rate of 0.0778 kg/s achieves the maximum recovery of 67.21% and maximum CO2 storage efficiency of 69.54%, equal to 23.88 × 106 kg of natural gas exploited from the depleted reservoir and 74.52 × 106 kg of CO2 stored in pore volume of 1.81 × 106 m3 of the reservoir. This case also has minimum injection pressure jump of 0.08 MPa thereby reducing the risk of formation fracture and CO2 leakage. However, by conducting a simple cost/benefit analysis, it is determined that this optimally performing case is not the best economically because of higher drilling cost of horizontal well compared to a vertical well. It is found that a vertical well with two suitably placed perforations with optimized injection rate of 0.1025 kg/s is economically superior since the previously used production wells can be reused for CO2 injection, which can therefore reduce both the equipment and the drilling costs. It is hoped that the findings of this work should provide some insights into the optimization of CO2-EGR with maximum economic benefit for implementation in industrial practice.

Optimization of CO2 Immiscible injection parameters by multi-index orthogonal test

Optimization of CO2 immiscible injection incomplex low permeability reservoir

Optimization Study of Injection-Production Parameters for CO2 Enhanced Oil Recovery and Storage in Low Permeability Oil Reservoirs

Experimental and numerical studies on CO2 injectivity in low permeability oil reservoirs

CO2-prepad injection EOR simulation and sensitivity analysis considering miscibility and geomechanics in tight oil reservoirs

A New Gradient-Accelerated Two-Stage Multiobjective Optimization Method for CO2-Alternating-Water Injection in an Oil Reservoir

Optimization of CO2 EOR and geological sequestration in high-water cut oil reservoirs

Optimization of Carbon Sequestration and Carbon Displacement in Fractured Horizontal Wells in Low Permeability Reservoirs

Study on Enhanced Oil Recovery Mechanism of CO 2 Miscible Flooding in Heterogeneous Reservoirs under Different Injection Methods

Pore-scale characterization of carbon dioxide storage at immiscible and near-miscible conditions in altered-wettability reservoir rocks

Simulation Study of Allied In-Situ Injection and Production for Enhancing Shale Oil Recovery and CO2 Emission Control

Machine-Learning-Based Approach to Optimize CO2-WAG Flooding in Low Permeability Oil Reservoirs

Research on Optimization of CCUS Injection Production Parameters in High-Temperature Reservoirs Based on Intelligent Optimization Algorithms

Experimental investigation of carbon dioxide flooding in heavy oil reservoirs for enhanced oil recovery

Injection-production optimization of carbonate reservoir based on an inter-well connectivity model

Experimental investigation of CO2 storage and oil production of different CO2 injection methods at pore-scale and core-scale

Laboratory Study on the Oil Displacement Process in Low-Permeability Cores with Different Injection Fluids

Monte Carlo Simulation of the CO2 Flooding Efficiency at a Core Scale for Different Oil Compositions

Multiphase flow characteristics and EOR mechanism of immiscible CO2 water-alternating-gas injection after continuous CO2 injection: A micro-scale visual investigation

Accelerated optimization of CO2-miscible water-alternating-gas injection in carbonate reservoirs using production data-based parameterization

Numerical simulation and optimization of injection rates and wells placement for carbon dioxide enhanced gas recovery using a genetic algorithm