Laser-directed Energy Deposition of Low-Carbon, Low-Temperature Ultra-Fine Bainitic Multi-Physical Modeling, Microstructure and Performance Studies
Yanbing Guo,Dongsheng Wu,Yuan Chen,Lyuyuan Wang,Yuanqing Chi,Kai Feng,Zhuguo Li,Ninshu Ma
DOI: https://doi.org/10.1016/j.jmapro.2024.07.101
IF: 5.684
2024-01-01
Journal of Manufacturing Processes
Abstract:An innovative iron-based alloy powder characterized by reduced carbon content and elevated Mn content was developed, leading to the fabrication of iron-based ultrafine bainitic steel with exceptional mechanical properties utilizing laser-directed energy deposition (L-DED). The layers' morphology, microstructure, phase composition, and elemental distribution were analyzed, indicating that the melting depth of the layer was deep and ultra-fine dendrite formed in the top region. A multi-physical powder and melt pool simulation was conducted to analyze the melt flow and pool solidification characteristics, showing that the strong downward flow inside the molten pool caused by the powder impingement increased the melting depth. The cooling rate G x R, where G was the temperature gradient and R was the solidification rate, was higher at the top pool boundary, facilitating the ultrafine dendrite formation at this location. Following subsequent low-temperature isothermal heat treatment, a refined bainitic microstructure emerged within the deposited layer. The bainitic plates in the 573 K isothermally transformed bainite were interspersed with film-retained austenite (RA). Conversely, the bainitic plates formed at a lower temperature (523 K) exhibited a coalesced morphology stemming from the diminished stability of super-cooled austenite. The bainite plates underwent growth and coalescence, ultimately giving rise to the bainitic microstructure. The 523 K transformed coatings demonstrated superior hardness (509.2 HV), strength (1435 MPa), and elongation (11.5 %) compared to the 573 K transformed coatings (456.5 HV, 1241 MPa, 10.1 %). This research holds significant implications for advancing low-carbon bainitic materials with remarkable comprehensive mechanical properties in additive manufacturing applications.