Abstract:Molten salt electrolysis is one of the most important methods to produce rare earth metals and their alloys. In this method, mixtures consisting of rare earth chlorides and alkali chlorides are usually used as electrolytes. The knowledge of the thermodynamic properties of electrolytes is essential to design and improve the electrolytic process. The relationship between the composition and the primary crystal temperature can be obtained through the phase diagram of the molten salt. Then the electrolysis temperature and electrolyte composition can be initially determined, which lays a foundation for further study of other properties. Since the most commonly used alkali chlorides in industry are LiCl, NaCl and KCl, the phase equilibrium data of LiCl-NaCl-KCl are bases for constructing the thermodynamic database of multicomponent chloride melts containing rare earths. This paper mainly focuses on the thermodynamic properties of the binary system LiCl-NaCl and the ternary system LiCl-NaCl-KCl. With regard to the binary system LiCl-NaCl, numerous researchers have used the thermal analysis method to experimentally measure its phase diagram. However, the data obtained by different researchers are quite different. Whether there exist intermediate compounds and whether it is an isomorphous phase diagram is still not confirmed. Furthermore, the existing experimental data were mostly measured by the cooling curve method from 1910 to 1960 and they are generally not consistent with each other. Besides, the deviation between the recently calculated phase diagram and experimental data is somewhat large. For instance, the temperature deviation between the calculated and measured solidus can be up to 30 K. With respect to the ternary system LiCl-NaCl-KCl, the measurement of the phase diagram has been performed by many researchers and the thermodynamic optimization has also been carried out. However, there is significant difference among these experimental data. And the results of previous optimization are inconsistent with FTsalt database of FactSage software. For example, there is an eutectic point in the liquidus projection of the phase diagram of LiCl-NaCl-KCl at 619 K, while according to the Fact Sage software there is only a minimum instead of an eutectic point and the temperature is 621 K. Therefore, the phase diagrams of LiCl-NaCl and LiCl-NaCl-KCl systems were measured using differential thermal analysis in this work. Then these systems were thermodynamically optimized based on the measured data, including phase diagram, enthalpy of mixing, activity, etc, in previous and current work using CALPHAD method. During the optimization, the modified quasichemical model was used to describe the liquid solution while the Compound Energy Formulism was employed to model the solid solution. According to our calculation. LiCl-NaCl has an isomorphous phase diagram with a minimum at xNuct=0.262 and 7' =820 K. Compared with the previous optimization results, the solidus calculated in this paper is closer to the experimental value. The calculated temperature at which the solid solution undergoes phase separation is within the range of experimental data. Apart from that, there is a minimum in the liquidus projection of LiCl-NaCl-KCl system, rather than a four -phase eutectic point. The corresponding component is 55%LiCl-8%NaCl-37%KCl and the temperature is 620 K, which is in common with the literature. Therefore, the thermodynamic parameters obtained in this work are more reasonable.

Thermodynamic Properties of Aqueous Mixtures of Licl and Li2so4 at Different Temperatures

A New Empirical Equation for the Specific Thermal Capacity of Aqueous LiCl Solutions in a Wide Range of Conditions

Study on thermodynamic properties of aqueous lithium salts

Thermodynamic study of the mixed system (CsCl + CaCl2 + H2O) by EMF Measurements at T = 298.15 K

Thermodynamic Properties of the Ternary System Potassium Bromide + Lithium Bromide + Water at 25°C

Equilibrium Thermodynamic Properties of Aqueous Solutions of Ionic Liquid 1-Ethyl-3-Methylimidazolium Methanesulfonate [EMIM][MeSO3]

Mean activity coefficients of KCl in the KCl + SrCl2 + H2O solutions at 278.15 K determined by cell potential method and their application to the prediction of solid-liquid equilibria of the KCl + SrCl2 + H2O system

Measurement of components activity coefficients of mixed electrolyte by EMF method

Temperature and Concentration Dependence of the Physical Properties and Local Structures of Molten NaCl-KCl-LiCl Mixtures

Computational insights into the ionic transport mechanism and interfacial stability of the Li2OHCl solid-state electrolyte

Study on phase diagrams and properties of solutions in ternary systems Li+,K+(Mg2+)/SO42‐‐H2O at 25°C

<i>g</i><sup>E</sup>Model for Single- and Mixed-Solvent Electrolyte Systems. 3. Prediction of Salt Solubilities in Aqueous Electrolyte Systems

Effect of the Temperature and Coordination Atom on the Physicochemical Properties of Chelate-Based Ionic Liquids and Their Binary Mixtures with Water

Structural and thermodynamic properties of the Li6PS5Cl solid electrolyte using first-principles calculations

Studies On Thermodynamics Of Solution Of Scattered Metal Compounds I. The System Of Hcl+Gacl3+H2o

Ge Model for Single- and Mixed-Solvent Electrolyte Systems. 3. Prediction of Salt Solubilities in Aqueous Electrolyte Systems

Online monitoring of solubility of Li2CO3 in the NaCl–KCl–Na2SO4 system

Experimental Measurement and Thermodynamic Optimization of the Phase Diagram of LiCl-NaCl-KCl System

On the Dissolution of Lithium Sulfate in Water: Anion Photoelectron Spectroscopy and Density Functional Theory Calculations.

Thermophysical properties of choline chloride:4ethylene glycol and LiPF6 mixtures for lithium battery applications

Solubility determination and thermodynamic modeling in the quaternary system Li2SO4 – LiBO2 – Li2B4O7 – H2O at T = 308.15 K and p = 0.1 MPa