Abstract:The development of solid-state batteries has gained significant attention in recent years, owing to their potential to enhance the temperature range and energy density of energy storage devices. Sulfide-based electrolytes are some of the most promising candidates for solid-state batteries, thanks to their high ionic conductivity and low processing temperature. For lithium-sulfur (Li-S) batteries, the transition from liquid to solid electrolytes holds even greater promise. Sulfur is a readily available cathode material known for its high specific capacity, which endows Li-S batteries with remarkable specific energy and favourable environmental and economic impact. In liquid electrolytes however, the solubility of sulfur and lithium polysulfide causes a multitude of issues that hamper the performance of the Li-S system: rapid self-discharge, redox shuttle mechanism during charging, and loss of active sulfur and lithium material due to direct chemical reactivity. Solid-state Li-S cells are not prone to these issues, but they have, of course, issues of their own. Amongst them, the stability of the interface between the electrolyte and the lithium is of crucial importance to allow the use of this very high energy density negative electrode. In the present study, we compare two sulfide electrolytes, Li 6 PS 5 Cl and Li 7 P 3 S 11 , and assess their respective stability against lithium. We used innovative methods to characterize the interphase between the sulfide and the lithium without damaging it upon dismantling the cell. The nature and the properties of this interphase was characterised via EIS, XPS and ToF-SIMS. The EIS study showed that Li 6 PS 5 Cl forms a much more stable interphase with lithium than Li 7 P 3 S 11 , which is in accordance with most recent results in the literature. The XPS study confirmed the chemical composition of the interphase. Li 2 S and Li 3 P were present for both electrolytes. In the case of Li 6 PS 5 Cl, LiCl was also identified as expected. Gas cluster ion beam (GCIB) assisted abrasion of the interphase followed by in-situ XPS and ToF-SIMS suggested a separation of the components of the interphase depending on the depth of the abrasion. The interphase was found to be organised as Li 2 S-, Li 3 P- or LiCl-rich discrete layers, with the Li 2 S-rich layer being consistently the closest to lithium. This result confirms and completes the most recent research in the field published by Otto et al. in 2022 (doi: 10.1002/admi.202102387). To establish solid-state batteries as a practical energy storage option, it is essential to fully understand and effectively manage the Li-electrolyte interface. These findings suggest that thanks to the relative stability of its interface with lithium, Li 6 PS 5 Cl is the better option for solid-state lithium metal cells. It also sheds light on the reasons why this interface is more stable. The self-assembled lamellar structure of the interphase could also inspire strategies to better control the stability of solid electrolytes versus lithium.

Structural and thermodynamic properties of the Li6PS5Cl solid electrolyte using first-principles calculations

Thermodynamic and Mechanical Stability of Crystalline Phases of Li2S2

Structural and Electrolyte Properties of Li4P2S6

Pseudo-ternary LiBH4-LiCl-P2S5 system as structurally disordered bulk electrolyte for all-solid-state lithium batteries

Achieving superior ionic conductivity of Li6PS5I via introducing LiCl

Structure and Property Changes in Sulfide Solid Electrolytes with Lithiation: A First-Principles Study

From symmetry breaking in the bulk to phase transitions at the surface: a quantum-mechanical exploration of Li6PS5Cl argyrodite superionic conductor

Computational insights into the ionic transport mechanism and interfacial stability of the Li2OHCl solid-state electrolyte

Molecular-Level Insight into the Interfacial Reactivity and Ionic Conductivity of a Li-Argyrodite Li6PS5Cl Solid Electrolyte at Bare and Coated Li-Metal Anodes

Atomic-level Insights into the Highly Conductive Lithium Thiophosphate Solid Electrolytes with Exceptional Stability Against Lithium Metal

Structures, Li + mobilities, and interfacial properties of solid electrolytes Li 3 PS 4 and Li 3 PO 4 from first principles

Diffusion of Lithium Ions in Lithium-Argyrodite Solid-State Electrolytes from Equilibrium and Nonequilibrium Molecular Dynamics Simulations

Thermal conductivity of Li$_3$PS$_4$ solid electrolytes with ab initio accuracy

Atomistic modeling of bulk and grain boundary diffusion in solid electrolyte Li$_6$PS$_5$Cl using machine-learning interatomic potentials

Materials Perspective on New Lithium Chlorides and Bromides: Insights into Thermo-Physical Properties

Structural and Transport Properties of Li/S Battery Electrolytes: Role of the Polysulfide Species

Sulfide-Based Solid-State Lithium-Sulfur Batteries: An in-Depth Study of the Li-Electrolyte Interface

DFT Modelling of Li6SiO4Cl2 Electrolyte Material for Li-Ion Batteries

Superionic Conduction and Interfacial Properties of the Low Temperature Phase Li7P2S8Br0.5I0.5

Li15P4S16Cl3, a Lithium Chlorothiophosphate as a Solid-State Ionic Conductor

Synthetic optimization and application of Li-argyrodite Li6PS5I in solid-state battery at different temperatures