Abstract:Supercapacitors have been regarded as one of the next-generation energy storage devices because of the high power density, excellent cycling performance, long lifespan and easy maintenance. However, its relatively low specific energy hinders its application in the future. Recently, Na-ion based aqueous hybrid supercapacitors have attracted worldwide attention due to its high energy density, environment friendly and low cost. In our work, the Na-ion aqueous hybrid supercapacitor is constructed with NaTi2(PO4)(3)/C and commercial activated carbon as electrode materials. NaTi2(PO4)(3)/C nanoparticles with the size of about 40 nm were synthesized by high-temperature solid state reaction method using the NaTi2(PO4)(3)/C precursor that was prepared through the solution method with Ti(C4H9O)(4), NH4H2PO4, Na2CO3 as the raw materials, and citric acid as the carbon source. The electrochemical tests were performed using 1 mol.L-1 Na2SO4 solution as the electrolyte. The carbon-coated NaTi2(PO4)(3) electrode delivers the discharge capacity of 122 mAh.g(-1) and shows an excellent cycling stability with the retention of 60% of the initial capacity after 1000 cycles at a 10C rate. The supercapacitor was consisted of NaTi2(PO4)(3)/C anode, AC cathode and 1 mol.L-1 Na2SO4 electrolyte. And the weight ratio of active materials in cathode and anode was 2.2. Cyclic voltammetry, galvanostatic test were employed to study the electrochemical properties of the supercapacitor. The as-fabricated device was then cycled between 0.15 similar to 1.4 V with different current density. Our results show the power density of 121.15 W.kg(-1) with specific energy of 18.71 Wh.kg(-1) at the current density of 0.5 A.g(-1). Moreover, the specific energy and power density goes to 14.13 Wh.kg(-1) and 2.42 kW.kg(-1) at a higher current density of 10 A.g(-1). More importantly, the device showed an excellent cycling stability with the retention of 76% after 1000 cycles at a current density of 1 A.g(-1). This research shows the designed hybrid supercapacitor has the potential to be used as auxiliary high-power energy storage device for the practical applications.

Study on the performance of 35 V hybrid supercapacitor

Study on the Aqueous Hybrid Supercapacitor Based on Carbon-coated NaTi2(PO4)3 and Activated Carbon Electrode Materials

High-Performance Supercapacitors Based on Graphene/Activated Carbon Hybrid Electrodes Prepared Via Dry Processing

Production of a hybrid capacitive storage device via hydrogen gas and carbon electrodes coupling

A Hybrid of MnO2 Nanowires and MWCNTs As Cathode of Excellent Rate Capability for Supercapacitors

Electrochemical Capacitance Performance of Hybrid Supercapacitors Based on Ni(OH)[sub 2]∕carbon Nanotube Composites and Activated Carbon

High Performance Hybrid Supercapacitor Based on Graphene-Supported Ni(OH)2-Nanowires and Ordered Mesoporous Carbon CMK-5

Aqueous V 2 O 5 /activated carbon zinc-ion hybrid capacitors with high energy density and excellent cycling stability

Enhancing safety and performance of hybrid supercapacitors through material system optimization

Hybrid nanomaterial of α-Co(OH)2 nanosheets and few-layer graphene as an enhanced electrode material for supercapacitors

Review on supercapacitors: Technologies and performance evaluation

Research progress of hybrid supercapacitor

The Performance of 600f Power Super Capacitor Using Carbon Nanotubes Electrodes and Nonaqueous Electrolyte

Effect of electrode charge balance on the energy storage performance of hybrid supercapacitor cells based on LiFePO4 as Li-ion battery electrode and activated carbon

Trial Producing the Supercapacitor with Activated Carbon Fiber Electrode

Remarkably improving the specific energy of supercapacitor based on a biomass-derived interconnected hierarchical porous carbon by using a newly-developed mixed alkaline aqueous electrolyte with widened operation voltage

A Low-Cost Zn-Based Aqueous Supercapacitor with High Energy Density

Low-crystalline iron oxide hydroxide nanoparticle anode for high-performance supercapacitors

Electrochemical Profile of an Asymmetric Supercapacitor Using Carbon-Coated LiTi2(PO4)3 and Active Carbon Electrodes

Engineering three-dimensional hybrid supercapacitors and microsupercapacitors for high-performance integrated energy storage

WITHDRAWN: Ingenious design and construction of sandwich-like architecture of CC@NiAl-LDH@GO@NiCo-LDH with high mass loading as electrode material for high performance hybrid quasi-solid-state supercapacitors