Glucose oxidation over Au/TS-1 catalyst
Yue Tang,ZHU Ming-qiao,HUANG Lin,WANG Meng,Xinzhi Chen
DOI: https://doi.org/10.3785/j.issn.1008-973X.2013.06.026
2013-01-01
Abstract:Aiming at the disadvantages of long cycle,low selectivity and high level control of temperature in the production of sodium gluconate by traditional biological fermentation method,Au/TS-1 nano catalysts were prepared by three kinds of method and characterized by surface area and pore volume using nitrogen adsorption using BET method,X-ray diffraction(XRD) and transmission electron microscopy(TEM).The catalytic performance of the catalysts used in oxidation of glucose to sodium gluconate using oxygen as an oxidant was evaluated,and effects of reaction conditions were investigated.The results showed that the Au/TS-1 catalyst with gold mass fraction of 4% prepared by deposition precipitation(DP) method was the best catalyst with the uniform nano gold mean particle size of 10-20 nm,and the optimum reaction conditions were at 60 ℃,pH of 9.5,oxygen flowrate of 40 mL/min,catalyst weight of 0.18 g,and glucose mass fraction of 5%,at which the glucose conversion of 100% and the sodium gluconate selectivity of 100% could be obtained at 23 min,but the catalytic activity was decreased rapidly after the fourth reuse.It is concluded that the heterogeneous Au/TS-1 catalysts prepared by DP method with a given size of nano gold particle show advantages of short cycle,high activity and good selectivity,but their stability needs to be improved.