Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Electromagnetic racial force analysis of asynchronous motors under static eccentricity

Analytical Modeling and Finite-Element Computation of Radial Vibration Force in Fractional-Slot Permanent-Magnet Brushless Machines

Electromagnetic Performance Analysis and Optimization of Asynchronous Motors Based on Finite Element Analysis

Electromagnetic performance of interior permanent magnet machines with eccentricity

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

An Analytical Model of Unbalanced Magnetic Force in Fractional-Slot Surface-Mounted Permanent Magnet Machines

Unbalanced Magnetic Force In Permanent Magnet Machines Having Asymmetric Windings And Static/Rotating Eccentricities

Vibration characteristics analysis of a rotor for a permanent magnet motor with Air-Gap Eccentricity

Electromagnetically Excited Vibration Analysis for an Asynchronous Electrical Machine with Finite Element Method

Magneto-Mechanical Coupling Analysis Of Asynchronous Motor Considering Stator Vibration

Analysis on the Variation Laws of Electromagnetic Force Wave and Vibration Response of Squirrel-Cage Induction Motor under Rotor Eccentricity

Simulation Analysis of Electromagnetic Noise From Squirrel-cage Asynchronous Motors

Finite Element Calculation of Radial Electromagnetic Force Wave in Squirrel-Cage Asynchronous Motors

Weight Estimation of Rotor Eccentric Load Based on Acceleration Sensor

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Modeling and analysis of electromagnetic force in interior permanent magnet synchronous motor used for electric vehicles

Analysis of rotor vibration characteristics of surface mounted permanent magnet synchronous motor under air gap eccentricity fault

Researches on Behavior of Vibration in Axial Flux Permanent Magnet Synchronous Motor

Analytical modeling of stator vibration for surface mount permanent magnet brushless motors

Radial force analytic modeling for a novel bearingless switched reluctance motor when considering rotor eccentricity

Comparison of Eccentricity Impact on Electromagnetic Forces in Internal- and External-Rotor Permanent Magnet Synchronous Motors