Abstract:DSC, SEM–EDS, XRD and high-temperature XRD analysis was used to study thermal and crystallization behaviour of yttrium aluminate glasses prepared in the form of microspheres. The glasses YA-E (eutectic composition from the pseudo-binary system Al2O3–Y3Al5O12) and YA-G (a composition identical to the stoichiometric Y3Al5O12 (YAG) phase) were prepared by combination of the Pechini method with flame synthesis. The resulting microspheres were largely amorphous, but contained traces of yttrium–aluminium garnet as the main crystalline phase embedded in the yttrium aluminate glass matrix. Crystallization of the YAG phase was observed as the dominant exothermic process on DSC curves. From the DSC records, the basic thermal characteristics of the matrix glass, i.e. Tg (glass transition temperature), Tx (onset of crystallization peak temperature), Tf (temperature of the inflection point of the crystallization peak) and Tp (maximum of crystallization peak temperature), were determined. HT XRD experiments in the temperature interval 750–1200 °C and isothermal HT XRD experiments at 932, 998 and 1200 °C with 6-h holding time were also performed. Crystallization experiments at lower temperatures 932 °C (YA-E) and 915 °C (YA-G) were conducted to study phase development in a low-temperature region. Crystallization experiments at higher temperatures (1000, 1300 and 1500 °C) with maximum holding time of 6 h were performed to study crystallization of α-Al2O3 in the eutectic system. The SEM and SEM–EDS examination of polished cross sections of crystallized microspheres revealed slow volume crystallization of the YAG phase in the AY-E glass. Eventually, polycrystalline microspheres with fine-grained microstructure were prepared after 6-h treatment at 1500 °C.

Phase Composition and Structure of Grain Boundary of Oversintered Y3al5o12 Ceramics

Phase Selection of YAG Melt under Containerless Solidification Condition

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Effect of Y2 O3 Addition Method on Phase Transformation of Alumina Ceramics During Sintering

Formation Mechanism of Impure Phases and Crystallinity Investigation of YAG Powders Synthesized Via the Co-precipitation Method

Synthesis of Nd3+ Doped Nano-Crystalline Yttrium Aluminum Garnet (YAG) Powders Leading to Transparent Ceramic

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

Phase composition, crystal structure, and microwave dielectric properties of Nb-doped and Y-deficient yttrium aluminum garnet ceramics

A Low Viscosity Slurry System for Fabricating Chromium Doped Yttrium Aluminum Garnet (cr:Yag) Transparent Ceramics

Thermal behaviour of yttrium aluminate glasses studied by DSC, high-temperature X-ray diffraction, SEM and SEM–EDS

In Situ TEM/STEM Investigation of Crystallization in Y3Al5O12:Ce at High Temperatures Inside a Transmission Electron Microscope

Phase Composition and Stability, Sintering and Thermal Conductivity of Gd2O3 and Yb2O3 Co-Doped YSZ

Synthesis of Submicron-Sized Spherical Y2O3 Powder for Transparent YAG Ceramics

Effect of Y<sub>2</sub>O<sub>3</sub> on Phase Transformation and Dielectric Properties of Alumina Ceramics

Evolution of core–rim structures and phase transformations in infra-red transmitting Y-α-SiAlON ceramics

Melt-Casting of Y3al5o12 (yag) Ceramics by Combustion Synthesis under High Gravity with the Addition of Glass

Effect of composition deviation on the microstructure and luminescence properties of Nd:YAG ceramics

Effects of Sintering Aids on the Transparency and Conversion Efficiency of Cr4+ Ions in Cr: YAG Transparent Ceramics

Influences of Process Parameters on the Forming of Yag Phase

Microstructure and Densification Mechanism of Low Temperature Sintering Bi-Substituted Yttrium Iron Garnet