Abstract:The liquid state thermophysical properties and amorphous solidification kinetics of Fe50−xCoxCr14Mo14C9B8Tm5 ( x=10 , 15, 20, and 25) alloys were explored by electromagnetic and electrostatic levitation techniques. It was found that the surface tension of liquid alloys with Fe contents below 30 at. % had a strong temperature dependence. The high surface tension led to a sharp increase in the interfacial free-energy penalty. A high nucleation barrier was formed inside the melt, which greatly inhibited the nucleation rate. The liquid viscosity revealed the strong liquid feature of this alloy series, which became the dominant kinetic factor determining their solidification mechanisms. The high viscosity hindered atomic diffusion and delayed nucleation. The long crystallizing incubation time of Fe30Co20Cr14Mo14C9B8Tm5 ensured a strong glass-forming ability and a low critical cooling rate of 2.11×103Ks−1 . As a result, a bulk metallic glass rod with an 8-mm diameter was successfully prepared by a convenient casting procedure. This rod could remain in a glassy state at a higher temperature and over a wider temperature range due to its high glass-transition temperature and large undercooled liquid region. The apparent activation energy for nucleation was derived as 463.8 kJmol−1 according to the nonisothermal crystallization kinetics, indicating that the bulk metallic glass had to absorb a large amount of energy to overcome the potential barriers before nucleation and thus exhibited excellent thermal stability. https://doi.org/10.1103/PhysRevE.110.034612 ©2024 American Physical Society

Glass Formation for Iron-Based Alloys by Combining Kinetic and Thermodynamic Parameters

Phase Evolution and Glass Formation in an Fe-Based Alloy

Glass-Forming Ability of an Iron-Based Alloy Enhanced by Co Addition and Evaluated by a New Criterion

Thermodynamic Characteristics of Ti-based Glass-Forming Alloys

Glass Formation of the Fe–Hf System Studied by Thermodynamic Calculation and Ion Beam Mixing

Proposed Thermodynamic Method to Predict the Glass Formation of the Ternary Transition Metal Systems

Non-isothermal crystallization kinetics and glass-forming ability of Ti 41 Zr 25 Be 28 Fe 6 bulk metallic glass investigated by differential scanning calorimetry

Interaction of Components in Glass-Forming Melts of Iron and Nickel with Titanium, Zirconium, and Hafnium I. Mixing Enthalpies of Liquid Alloys

Thermodynamic Modeling of Glass Formation in Metallic Glasses

Prediction of the Glass Forming Ability in a Fe-25%B Binary Amorphous Alloy Based on Phase-Field Method

Critical Cooling Rates For Glass Formation In Zr66al9cu16ni9

Non-isothermal crystallization kinetics and glass-forming ability of Ti41Zr25Be28Fe6 bulk metallic glass investigated by differential scanning calorimetry

Effects of Alloying Elements on Crystallization Kinetics of Ti–Zr–Be Bulk Metallic Glass

Glass forming abilities of the Fe–Ta–(Zr, Ti) alloys studied by thermodynamic calculation and ion beam mixing

Kinetics and crystallization path of a Fe-based metallic glass alloy

Metallic glass formation in Cu–Ni–Ti (Zr, Hf) systems studied by thermodynamic calculations

Crystallization Kinetics of the Fe68Nb6B23Mo3 Glassy Ribbons Studied by Differential Scanning Calorimetry

Critical cooling rates for glass formation in Mg65Ni20Nd15 alloy

On the formation of metallic glass

Glass formation in binary alloys with different atomic symmetries

Liquid state properties and amorphous solidification kinetics of multicomponent alloys investigated under containerless processing conditions