Abstract:In this paper, the internal friction behaviour of Zr-Ti-Cu-Ni-Be bulk metallic glass (BMG) containing 2 at% Fe at elevated temperatures has been studied in isothermal dynamic mechanical analysis experiments. The experiments lead to the determination of metastable equilibrium internal friction Q(e)(-1), as a function of temperature, which can be well described by the Maxwell model with viscosity eta(T), following a Vogel-Fulcher-Tammann (VFT) relation or Arrehnius law. Comparison with the Zr-Ti-Cu-Ni-Be glass-forming liquid shows that a small addition of Fe results in a stronger liquid behaviour of the alloy, exhibiting a higher strength parameter as well as lower VFT temperature and therefore correlates better glass forming ability and thermal stability. From the isothermal internal friction data, the activation energies for viscous flow and primary crystallization of the Zr based supercooled metallic liquid are also derived. It is found that the former is comparable to the activation energy controlling the diffusion process of atoms, e. g. the Ni element of medium size and higher mobility among the components of this alloy, while the latter to that of atoms, e. g. the Ti element of larger size and lower mobility. Thus, it is proposed that both isothermal viscous flow and primary crystallization of the alloy in the supercooleld liquid region are atom diffusion-controlled processes. However, the dominating atomic species are different from each other in the multicomponent Zr based BMG.

Critical Cooling Rates For Glass Formation In Zr66al9cu16ni9

Critical cooling rates for glass formation in Mg65Ni20Nd15 alloy

Critical Cooling Rate and Thermal Stability for a Ti–Zr–Ni–Cu–Be Metallic Glass

Cooling rate effects on the microstructure and phase formation in Zr51Cu20.7Ni12Al16.3 bulk metallic glass

Cooling Rate Effects on the Microstructure and Phase Formation in Zr51Cu20.7Ni12Al16.3bulk Metallic Glass

The Relations Between ΔT and the Glass Forming Ability of Bulk Amorphous Zr–Cu–Ni–Al–Hf–Ti and Zr52.5Cu17.9Ni14.6Al10Ti5 Alloys

Evaluation of Glass Formation and Critical Casting Diameter in Al-Based Metallic Glasses

Non-isothermal crystallization kinetics and glass-forming ability of Ti41Zr25Be28Fe6 bulk metallic glass investigated by differential scanning calorimetry

Non-isothermal crystallization kinetics and glass-forming ability of Ti 41 Zr 25 Be 28 Fe 6 bulk metallic glass investigated by differential scanning calorimetry

Critical Cooling Rate and Thermal Stability of Fe–Co–Zr–Y–Cr–Mo–B Amorphous Alloy

Crystallization behavior of ZrAlNiCu bulk metallic glass with wide supercooled liquid region

Thermal Behavior and Non-Isothermal Crystallization Kinetics of (ti41zr25be28fe6)93cu7 Bulk Metallic Glass

Relation Between Glass and Quasicrystal Formation in the Zr–Nb–Cu–Ni–Al Alloys Upon Solidification

Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass

Low Temperature Specific Heat of a Typical Glass Forming Alloy

Crystallization Path and Non-Isothermal Kinetics of the Zr59.5Cu14.4Ni11.6Al9.7Nb4.8 Metallic Glass under Different Heating Rates

Isothermal internal friction behaviour of a Zr based bulk metallic glass with large supercooled liquid region

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

The Rheological Behavior of Bulk Metallic Glass Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5

Crystallization Kinetics in Cu35ag15zr45al15 Metallic Glass

A Study of Cooling Process in Bulk Metallic Glasses Fabrication