Abstract:Rock-like materials are often used in physical simulation tests to study deep dynamic disasters, such as rock bursts. In this study, a uniaxial compression failure test was conducted to investigate the impact tendency and damage characteristics of rock-like materials, and the evolution law of the acoustic emission and infrared thermal imaging during compression failure was revealed. First, the impact tendencies of rock-like materials and their acoustic emission and thermal imaging response characteristics during compression failure were analyzed. At the initial stage of loading, the acoustic emission intensity was low, and the average infrared radiation temperature exhibited a downward trend. With the gradual stress loading, the acoustic emission count and average infrared radiation temperature began to increase slowly but remained in a low frequency and low energy range. When the stress was close to the peak, the acoustic emission count and average infrared radiation temperature increased significantly with more evident low-frequency and high-energy signals. Second, the damage variable was defined based on the acoustic emission and infrared radiation temperature. An average infrared radiation cumulative temperature damage variable was proposed. The damage process of rock-like materials was divided into initial, stable, and accelerated stages. Finally, by comparing the damage variables defined by the different parameters and the damage constitutive model of rock-like materials, the rationality of the damage variables was verified. Considering that the Lemaitre constitutive equation ignored the compaction effect of rock-like materials, a correction coefficient K was introduced to reduce the deviation between the theoretical stress curve and the experimental curve. The results of this study provide theoretical support for studying the impact tendencies and damage characteristics of rock-like materials.

Research on the Mechanical Stimulation Response and Thermal Effects Simulation of Energetic Materials

Method of Determining the Critical Impact Velocity of Energetic Devices

Investigation of dynamic response of brittle materials under high-rate loading

Research of Loading Effects of Blast in Air

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

Modelling on Shock-Induced Energy Release Behavior of Reactive Materials considering Mechanical-Thermal-Chemical Coupled Effect

Meso-Simulation and Experimental Research on the Mechanical Behavior of an Energetic Explosive

Testing and evaluation of the thermal damage caused by an explosion of energetic materials

The thermal response of the ignition and combustion of high-energy material projectiles under the influence of heat

Effects of Thermal Damage on Impact Response Characteristics of High-Energy Propellants

Dynamic Failure Simulation of Metal Materials and Structures under Blast and Impact Loading

Simulation of high explosive explosion using adaptive material point method

Destructive Effect of High-Temperature Heat Flow of Solid Slow-Release Energetic Materials on a Steel Target

Dynamic constitutive model and ignition behavior of enhanced Al/PTFE

Hybrid Continuum and Multi‐Particle Simulation of RDX Powder Subjected to Drop Impact

Study on Impact Tendency and Damage Characteristics of Rock-Like Materials Based on Acoustic and Thermal Responses

Effects of Main Components on Energy Output Characteristics of Thermobaric Explosive — A Case Study of Typical Formulations

Research on the Equivalent Impact Test Method for Different Pulse Widths Based on Micro-Electro-Mechanical System Devices

Numerical study of countermeasure against thermal stimuli for HMX-based polymer-bonded explosives

Evaluating shock sensitivity and decomposition of energetic materials by ReaxFF molecular dynamics

Multiple Impact Phenomenon in Impact Hammer Testing: Theoretical Analysis and Numerical Simulation