Abstract:The high-power laser device utilizes a multi-pass amplification system to achieve elevated power laser output. Laser beam is transmitted several times through the amplifier, and the pointing stability is a critical factor affecting the efficiency of the system. Any perturbation of the optics during laser transmission can cause misalignment and further lead to beam pointing errors. Laser beam propagation simulation was conducted using the ray tracing method. Equivalent experiment was performed using a laser with a wavelength of 532nm, and the centroid position data of the laser beam were collected to characterize the effect of the optics misalignment on laser pointing. A model evaluating the sensitivity of the optics was constructed, and the analysis of how various optics impact pointing accuracy was conducted. Results indicate that, a linear relationship exists between the misalignment of the optic and the pointing shift and angular deviation of the beam when a single optic is misaligned. If multiple optics are misaligned, the shift in centroid position of the laser beam can be calculated by adding up the shifts caused by each misaligned optic. Furthermore, the shift in the centroid position of the laser beam is the linear superposition of the misalignment of each optic.

Research on High Power Pulse Laser Anti-Misalignment Resonators

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

The Research on Improving the Characteristics of Laser Output with Diffractive Optical Elements

Analysis of Laser Modes in High Power Unstable Resonators with Intra-Cavity Wavefront Aberrations

Research Advances in Mode-Locked Fiber Lasers Based on Nonlinear Loop Mirror

Intracavity Deformable Mirror for Beam Quality Improvement and Power Enhancement of a Passively Q-switched Laser

Output Properties of a cube corner arrays resonator

Laser Beam Characteristic for Laser Resonators with Diffraction Optical Elements

Research on Compensation Characteristics of Thermal Insensitive Cavity

Experimental Investigation of Laser Power Addition with Composite Four-Mirror Cavity

Misalignment sensitivity of the cat’s eye cavity He–Ne laser

Study on symmetry of output beam of corner-pumped solid-state fundamental-mode laser

High power Solid state Laser with Corner Cube Retro-Reflectors of Mutual-injection Confinement

Right Angle Error Analysis of the Corner Cube Prism in He-Ne Laser with Folded Resonator

Research on 2 Μm Polarization Maintaining Laser Cavity Based on the Depolarization Characteristics of a Corner Cube Prism

Influences of Spherical Aberration on Resonator's Stable Zones and Fundamental Mode Output Power Scaling of Solid State Laser Oscillators.

Alignment-free He–Ne laser with folded cavity

Analysis of misaligned optics effects on beam pointing stability in dual-pass optical system

Experimental Research on the Stability and the Multi-Longitudinal Mode Interference of Bidirectional Outputs of Ld-Pumped Solid-State Ring Laser

Study on Directional Prism Resonator to Improve the Laser Beam Quality of Repetition Rate DPL

Structure and Closed-Loop Control of A Novel Compact Deformable Mirror for Wavefront Correction in A High Power Laser System