Abstract:Ferromagnetic shape memory alloys (FSMAs), such as Ni2MnGa alloy, promise to be the key materials in manufacturing new type of actuator and sensor because of their high responsive speed and large strain output. In order to find the best functions of FSMAs, the understanding of their martensite transformation crystallography is of enormous necessity and importance. In the present study, the topological model of martensite transformation was applied to the analysis of the interphase interfacial defect structure and crystallography of martensite transformation, such as the habit plane index and orientation relationship, in a Ni2MnGa alloy. The results obtained in this work were compared with the prediction from the phenomenological theory of martensite crystallography (PTMC). When the transformation dislocation b(+1/+1)(D1) with smaller Burgers vectors and the lattice invariant deformation (LID) dislocation b(L)=0.186[11 (1) over bar](M) are activated to accommodate the coherency strain with a twist angle omega=3.2 degrees, the habit plane is determined to be {0.691 -0.117 0.713}(P) represented in the parent crystal frame, having an inclination angle psi(P)=42.000 degrees with the terrace plane (111)(P). Furthermore, the orientation relationship between the parent and martensite phases is found to be, namely, {0.69 -0.117 0.713}(P) 0.317 degrees away from (101)(M) and [1 (1) over bar0](P) about 3.200 degrees away from [11 (1) over bar](M), which are close to the calculated values based on the phenomenological theory of martensite crystallography. It is evident that the transformation dislocation with smaller Burgers vectors can be activated more easily during a martensite transformation. Additionally, for a range of twist omega, the alternative combination of disconnection and LID might be introduced in the topological model to obtain multiple predictions of martensite transformation crystallography, which could provide an explanation for the diversity and complexity of martensite transformation crystallography resulting from the different measured positions or external fields. Moreover, the parameters of the interfacial defect network, i.e., the line direction and the spacing of the interfacial defects, were also determined according to the topological model of martensite transformation, while the PTMC provides limited information of the microstructure of the martensite interface. It has been shown that the topological model of martensite transformation exhibits greater flexibility and advantage compared to the PTMC.

A method of discrimination between stress-assisted and strain-induced martensitic transformation using atomic force microscopy

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

In-Situ Neutron Diffraction Investigation of Austenite → Ε-Martensite → Α-Martensite Transformation and Its Dynamic Effect on Macroscopic Serration in a 13%mn Metastable Austenitic Steel

Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

Measurement and Modeling of Deformation-Induced Martensitic Transformation in a Metastable Austenitic Stainless Steel under Cyclic Loadings

Investigation on the Internal friction of reverse martensitic transformation in Fe-Mn-Si based alloys

Revealing the Effects of Martensitic Transformation and Dislocation Slip in Austenite on the Micromechanical Behaviors of a 9ni Steel Using Crystal Plasticity Finite Element Method

Atomic scale modeling of the coherent strain field surrounding Ni4Ti3 precipitate and its effects on thermally-induced martensitic transformation in a NiTi alloy

Electron Microscopy Analysis of Deformation Induced Ε Martensite Transformation in an Fe-Mn-Si-Cr-Ni Alloy

A micro-mechanical model of non-thermo-elastic martensitic transformation

Dissecting the Mechanism of Martensitic Transformation Via Atomic-Scale Observations

Stress-induced Martensitic Transformation in Metastable Austenite Grains During Nanoindentation Investigation

The Crystallography Characteristics of Martensitic Transformation-Invariable Plane Strain

A Study of Friction-Induced Martensitic Transformation for Austenitic Manganese Steel

Strain-Induced Phase Transition in Martensitic Alloys: Phase-Field Simulation

In Situ Multi-Fields Investigation on Instability and Transformation Localization of Martensitic Phase Transformation in Niti Alloys

In-situ neutron diffraction investigation of two-stage martensitic transformation in a 13%Mn steel with serrated deformation

Measurement of the Volume Fraction of Stress-Induced Martensite in Fe-Mn-Si-Cr-N Shape Memory Alloy

STUDY ON THE DISLOCATION STRUCTURE OF INTERPHASE INTERFACE AND MARTEN SITE TRANSFORMATION CRYSTALLOGRAPHY IN Ni 2 MnGa ALLOY

High-energy X-ray Diffuse Scattering Studies on Deformation-Induced Spatially Confined Martensitic Transformations in Multifunctional Ti–24Nb–4Zr–8Sn Alloy