Abstract:In vitro compartmentalisation is an emerging technology for protein evolution and selection. In this presentation, we will report the development of a microdrop-based microfluidic plat- form for in vitro enzyme evolution and selection applications. A microfluidic chip has been developed and fabricated using the standard photolithography method in conjunction with electro- plating and hot embossing techniques. A cross channel geome- try was used to focus liquid flows for droplet generation. To realize on-chip compartmentalised bio-reactions, two droplet generators were fabricated on the same chip. Experiments have been carried out to measure droplet size, generation rate and speed using a photographic technique. Droplet size was found to be decreasing with increasing focusing oil flow rate for a given aqueous phase flow rate. When two droplet generators are used in the same chip, the droplets may be generated asyn- chronously due to different flow conditions. If the droplets were significantly smaller than channel size, the faster moving droplets could pass the slower moving droplets with little co- alescence. If the droplets were of the channel size, the faster moving droplets would break or fuse with the slow droplets. To achieve high rate of droplet fusion, active control should be in place for synchronous generation and fusion. The Synthetic Enzymes initiative in CSIRO is a multi- institutional effort aiming to develop enzymes with dramatically shifted functions or mechanisms that are capable of catalysing novel reactions not known in nature. This will be achieved by developing technology to introduce novel chemical groups to enzymes to synthesise enzymes using highly controllable cell- free methods, and to evolve enzymes using IVC technology. This paper will report some of the results in the IVC chip de- velopment. In particular, we will present some of the data on behaviour of droplets transport in microchannels. Chip design and fabrication

Droplets Transport in a Microfluidic Chip for In Vitro Compartmentalisation

A Versatile Microchannel Array Device for Portable and Parallel Droplet Generation

A versatile and robust microfluidic device for capillary-sized simple or multiple emulsions production

Research on Microfluidic Chip Design and Droplet Related Technology

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Lab-on-a-chip in vitro compartmentalization technologies for protein studies.

An Integrated Microfluidic Device for Droplet Manipulation

Ultrahigh-Throughput Enzyme Engineering and Discovery in In Vitro Compartments

Droplet Microfluidics for High-Throughput Screening and Directed Evolution of Biomolecules

Flexible On-Chip Droplet Generation, Switching and Splitting Via Controllable Hydrodynamics

Integrated Microdroplet-Based System for Enzyme Synthesis and Sampling

Enzyme synthesis and activity assay in microfluidic droplets on a chip

The effect of microfluidic chip geometry on droplet clustering in a high throughput droplet incubation platform for single-cell analysis

A home-made pipette droplet microfluidics rapid prototyping and training kit for digital PCR, microorganism/cell encapsulation and controlled microgel synthesis

Preparation of microfluidic chips by electroplating and used for microdroplet study

Field programmable digital microfluidics chip for high-throughput droplet array manipulation

Microfluidic Droplet Technique for In Vitro Directed Evolution

Picoliter Droplet Generation and Dense Bead-in-Droplet Encapsulation via Microfluidic Devices Fabricated via 3D Printed Molds

Design and Fabrication of a Fully-Integrated, Miniaturised Fluidic System for the Analysis of Enzyme Kinetics

An Integrated Droplet Manipulation Platform with Photodeformable Microfluidic Channels