Abstract:In vitro compartmentalisation is an emerging technology for protein evolution and selection. In this presentation, we will report the development of a microdrop-based microfluidic plat- form for in vitro enzyme evolution and selection applications. A microfluidic chip has been developed and fabricated using the standard photolithography method in conjunction with electro- plating and hot embossing techniques. A cross channel geome- try was used to focus liquid flows for droplet generation. To realize on-chip compartmentalised bio-reactions, two droplet generators were fabricated on the same chip. Experiments have been carried out to measure droplet size, generation rate and speed using a photographic technique. Droplet size was found to be decreasing with increasing focusing oil flow rate for a given aqueous phase flow rate. When two droplet generators are used in the same chip, the droplets may be generated asyn- chronously due to different flow conditions. If the droplets were significantly smaller than channel size, the faster moving droplets could pass the slower moving droplets with little co- alescence. If the droplets were of the channel size, the faster moving droplets would break or fuse with the slow droplets. To achieve high rate of droplet fusion, active control should be in place for synchronous generation and fusion. The Synthetic Enzymes initiative in CSIRO is a multi- institutional effort aiming to develop enzymes with dramatically shifted functions or mechanisms that are capable of catalysing novel reactions not known in nature. This will be achieved by developing technology to introduce novel chemical groups to enzymes to synthesise enzymes using highly controllable cell- free methods, and to evolve enzymes using IVC technology. This paper will report some of the results in the IVC chip de- velopment. In particular, we will present some of the data on behaviour of droplets transport in microchannels. Chip design and fabrication

Design and Fabrication of a Fully-Integrated, Miniaturised Fluidic System for the Analysis of Enzyme Kinetics

Design and Integration of an All-in-one Biomicrofluidic Chip.

Integrated Microdroplet-Based System for Enzyme Synthesis and Sampling

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

A methodology for rapid prototyping microfluidic devices with sophisticated functionality

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Microfluidic chemical analysis systems.

Lab-on-a-chip: a component view

Droplets Transport in a Microfluidic Chip for In Vitro Compartmentalisation

A Fully Integrated in vitro Diagnostic Microsystem

Microfluidics: Applications for analytical purposes in chemistry and biochemistry

From functional structure to packaging: full-printing fabrication of a microfluidic chip.

Integrating of analytical techniques with enzyme-mimicking nanomaterials for the fabrication of microfluidic systems for biomedical analysis

Microfluidic integration of regeneratable electrochemical affinity-based biosensors for continual monitoring of organ-on-a-chip devices

Design and Preparation of Microfluidics Device

Chip in a Lab: Microfluidics for Next Generation Life Science Research

Moving-part-free Microfluidic Systems for Lab-on-a-chip

Lab-on-a-chip with integrated optical transducers

Lab-in-a-tube: Ultracompact components for on-chip capture and detection of individual micro-/nanoorganisms

Portable and integrated microfluidic flow control system using off-the-shelf components towards organs-on-chip applications

Lab-on-a-chip (microfluidics) Technology