Abstract:Under conditions of seismic action or any other mutation stresses, the soil of the liquefiable foundation can lose its strength and stiffness rapidly due to the liquefication, resulting in the loss of the bearing capacity. The traditional anti-liquefaction measures mainly focus on the ground treatment, while the open-hole pipe pile provided in this paper has both anti-liquefaction and bearing capacity. Firstly, the liquid flow in the holes of the pipe pile is assumed to meet the Poiseuille equation, and the equal strain assumption is applied. Then we derive the analytic solution of the pore pressure considering both radial and vertical flows under the time-varying load, combined with the stress concentration phenomenon of the pipe pile composite foundation. Furthermore, considering the pore pressure accumulation under cyclic loading, the analytical solution is improved by using the empirical model of pore pressure development. Based on the analytical solution, this paper analyzes and compares the development of pore pressure of the open-hole pipe piles, gravel piles, undrained piles and natural foundation. Thus, the results indicate that the open-hole pipe pile has the best drainage capacity. The factors such as the modulus ratio of pile and soil and the radius ratio have important influence on the development of pore pressure. The higher the modulus ratio of pile and soil is, the smaller the radius ratio is, and the faster the pore pressure dissipation rate is. The influence of open-hole coefficient on the development of pore pressure is not obvious. The load frequency only affects the peak value of initial pore pressure and has little influence on the rate of pore pressure oscillation attenuation.

Application of Steel-Pipe Pile in Foundation Underpinning for Existing Buildings

Performance of the Underpinning Piles for Basement-Supplementing Retrofit of a Constructed Building

Construction Techniques for Reinforcement of Foundation of Existing Bridge Pile with Microsteel-Piped Pile

Experimental Study of the Bearing Capacity of a Drainage Pipe Pile under Vacuum Consolidation

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Innovative Design of Pipe Piles Combined Both the Effect of Pile Foundation and Composite Foundation for Soft Soil Treatment

Theoretical study of dynamic pore water pressure dissipation characteristics of open-hole pipe pile

The Principle of Pile-soil Interaction Applied to Reinforce Pile Accident

Analysis of cast-in-situ tubular piles in soft foundation improvement at bridge approaches

Design and Monitoring of the From of Foundation Pit Supporting

Application Study of Long-Short-Piled Raft Foundation

FEM Analysis and Design of Long Short Pile Composite Foundation

Model Test And Numerical Analysis Of Geogrid-Reinforced Pile-Supported Foundation

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Experimental and Application Study on Underpinning Engineering of Bridge Pile Foundation

Experimental Study on Bending Moment of Double-Row Steel Pipe Piles in Foundation Excavation

Theoretical analysis and engineering application of the new pile-soil-support system

New Form of Pipe Foundation on Deep Weak Subgrade

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Consolidation analysis of cement-pile composite foundation under rigid foundation

Analysis of stress and failure mechanism on composite foundation improved by rigid piles under flexible foundation considering damage of piles