Abstract:Beaded activated carbons (BACs) were derived from waste bamboo tar through carbonization (500°C for 2 hr) followed by physical activation using carbon dioxide (800–900°C for 2–4 hr). The adsorbent was examined for their physical and chemical properties, adsorption capacities toward methylethylketone (MEK) and toluene, and regenerabilities under microwave heating. It was found that the maximum total surface area reached for bamboo-tar-derived BAC after physical activation was 1364 m2 g−1, and more than 95% of the area was attributed to the microporous structures. Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models were applied to the adsorption isotherm fitting, and the minimum R2 for each model was 0.986, 0.915, and 0.943, respectively. The isosteric heats of adsorption calculated based on D-R parameters for methylethylketone and toluene were 44.04 to 51.50 and 45.88 to 73.27 KJ mol−1, respectively. They were slightly over the range of physisorption and increased with adsorbate loading, which might be related to the micropore filling mechanism. Microwave regeneration under 600 W of power output removed most of the adsorbate (>93.03%) within 8 min. The results of this study are intended to benefit future study on waste-derived adsorbent in environmental applications.Recycling waste bamboo tar for the novel adsorbent preparation is shown feasible in this study. Beaded activated carbon (BAC) synthesized from this waste bamboo tar possessed a high specific surface area, which aided in the capturing of volatile organic compounds (VOCs). Three adsorption isotherms, Langmuir, Freundlich, Dubinin-Radushkevich (D-R) models can be applied in interpreting the experimental adsorption data, providing information on adsorption heat and possible adsorption mechanism. A potential microwave regeneration method for BAC is tested, showing high desorption efficiencies with minimum heel formation. These findings can provide a new pathway for waste bamboo tar management and VOC abatement using adsorbents.

Study on Adsorption and Bio-degradation of Hexadecane with Biological Activated Carbon

Simple Combination Of Biodegradation And Carbon Adsorption - The Mechanism Of The Biological Activated Carbon Process

Research on advanced treatment of phenolic chemical wastewater and carbon replacement by the multi-layer biological activated carbon filter

Preparation, Characterization, and Application of Macroporous Activated Carbon (MAC) Suitable for the BAC Water Treatment Process

The Effect of Black Carbon on the Chemical Degradability of PCB1 Via TENAX Desorption Technology from the Perspective of Adsorption States

The Treatment of Cadmium-contained Wastewater Using Activated Carbon Prepared from Anaerobic Digested Residue of S.alterniflora

Experimental Study on Activated Carbon Adsorption for Treating Effluents from Oil-field Wastewater Treatment Facilities

Study on reactivation cycle of biological activated carbon (BAC) in water treatment

Physicochemical and porosity characteristics of thermally regenerated activated carbon polluted with biological activated carbon process.

Immobilized Biological Activated Carbon Process for Enhancing the Advanced Drinking Water Treatment

Comprehending adsorption of methylethylketone and toluene and microwave regeneration effectiveness for beaded activated carbon derived from recycled waste bamboo tar

Removal of Disinfection By-Product Formation Potentials by Biologically Assisted GAC Treatment

A novel ball-milled aluminum-carbon composite for enhanced adsorption and degradation of hexabromocyclododecane

Removal of Haloacetic Acids Formation Potential by Biodegradation Corperated with Adsorption

Changes of Biomass and Bacterial Communities in Biological Activated Carbon Filters for Drinking Water Treatment

Adsorption of Volatile Organic Compounds and Microwave 1 Regeneration on Self-Prepared High-Surface-Area Beaded Activated 2 Carbon

Evaluation of Backwash Strategies on Biologically Active Carbon Filters by Using Chloroacetic Acids As Indicator Chemicals

Application of EDTA-functionalized Bamboo Activated Carbon (BAC) for Pb(II) and Cu(II) Removal from Aqueous Solutions

A New Function of Spent Activated Carbon in BAC Process: Removing Heavy Metals by Ion Exchange Mechanism.

Genome and metabolome analysis of Bacillus sp. Hex-HIT36: A newly screened functional microorganism for the degradation of 1-hexadecene in industrial wastewater

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb2+ removal in water source