Abstract:In the semiconductor industry supply chain, there are complex processing steps from wafer to chip. Rapid Thermal Processing (RTP) is one of the key technologies, using lasers or high-temperature lamps to rapidly heat the wafer to over 1000°C for several seconds. This technique can produce high-quality silicides and oxides on the wafer while reducing the thermal budget in terms of temperature and time. RTP systems must be able to change the spatial energy distribution radiated onto the wafer to maintain temperature uniformity under different processing conditions, including varying gases, pressures, and wafer structures. However, the non-equilibrium conditions in RTP make modeling and prediction challenging, with temperature coupling issues in different wafer regions. This paper models the wafer heating system as a 5th-order time-delayed first-order inertia matrix and proposes a corresponding feedforward decoupling method. Traditional incremental PID control, when ramping up temperatures above 1000°C, leads to prolonged oscillations near the target temperature due to temperature coupling between regions, resulting in slow temperature convergence. The method proposed in this paper can effectively eliminate inter-regional coupling effects, unify PID parameters for better determination, and deploy them in practical RTP systems. Experimental results demonstrate that temperature convergence can be achieved rapidly, enhancing system heating efficiency. This study provides an effective solution to temperature control issues in wafer processing, with important practical implications for the semiconductor equipment manufacturing industry.

Research on Decoupling Control in Temperature and Humidity Control Systems.

Control of Temperature Uniformity in the Temperature Chamber with Centrifugal Acceleration

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

Decoupling Control and Simulation for Variable Flow Heating Systems

Research on the Winding/Unwinding Control System Based on Fuzzy Control Theory

The Research of Multi-variables Hierarchical Fuzzy Decouple Control Strategy Based on Human Knowledge

Results analysis and simulation of temperature and humidity decoupling controller based on fuzzy PID

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

A MIMO Decoupling Algorithm for Rapid Heating Systems of Wafers

Fuzzy control over temperature and humidity of artificial climate chest

Feedforward decoupling control of indoor temperature and humidity using a single direct expansion air conditioning unit

Application Study of Fuzzy Immune PID Algorithm in Temperature Control System

Feedback feedforward linear decoupling control of temperature and humidity in greenhouse

Multi-variable PID Neural Network Decoupling Algorithm in Scrap Copper Smelting Process Control

Study and Realization of Automatic Control for Variable Flow Heating Systems

Inverse Decoupling Fuzzy Active Disturbance Rejection Control for Supercritical CO2 Extraction

Research on the design method of the multivariable signal decoupling control system

Experimental Analysis on the Decoupling of Temperature and Humidity by Using a Double Circuit Cooling Coil

Decoupling Control Based on Fuzzy Neural-Network Inverse System in Marine Biological Enzyme Fermentation Process.

Fuzzy Control of Cold Storage Refrigeration System with Dynamic Coupling Compensation

Intelligent decoupling control for thickness and tension system of tandem cold rolling mill