Abstract:According to the absorption characteristic of carbon monoxide molecular in mid-infrared waveband,a dual-channel (i.e. detection signal channel and reference channel)differential carbon monoxide (CO)detection device is developed using an infrared thermal radiation light source (IR55)and dual-channel pyroelectric detector (LM244).A dual-channel lock-in amplifier is used to process the two output signals of the dual-channel detector,the system noise is restrained effectively and the detection precision of the instrument is enhanced.The detection principle of the system is introduced,the implementation scheme of the optical system and the dual-channel lock-in amplifier is given.The amplitude of the minimum standard signal that the dual-channel lock-in amplifier can extract is 1 mV,and the phase-shift error is below 0.2%.Using the prepared CO samples with the volume fraction of 0 ~1 ×1 0-3 ,the gas detection experiments were carried out to test the device performance.Experiment results show that the low detection limit of the system is about 1 ×1 0-5 ,and the relative measurement error is less than 1 5%.The concentration variation range is -5.2 ×1 0 -6 ~6.2 ×1 0 -6 when the gas volume fraction is 0 ×1 0 -6 .Considering the gas diffusion time in the gas-cell during static gas preparation,the response time of the instrument is about 58 ~62 s.Compared with the CO detection instruments utilizing quantum cascaded lasers and distributed feedback lasers,the developed instrument has the advantages of simple optical-path structure,high performance-cost ratio and etc.,and has broad application prospects in CO detection under the circumstances of coal-mine,environment protection and etc.

Design and Development of CO2 Analyzer of Atmospheric Ambient Based on MSP430F149

Design of Portable Quantitative Detectors for Methane Based on MSP430

Development And Agricultural Application Of A Mid-Infrared Carbon Dioxide Sensor System

Remote Sensing System for Vertical Profiles of Atmospheric CO2

[Open-path online monitoring of ambient atmospheric CO2 based on laser absorption spectrum]

Development of an atmospheric CO2 sensor based on TDLAS-WMS

Development and Application of Near-Infrared Laser Carbon Dioxide Gas Sensor System

Multi-channel data acquisition and processing system based on micro-sensor array

Design of multi-component gas measurement system based on STM32

Design of a Multi-Channel Gas Sensor Detection System Based on STM32 Microcontroller and LabVIEW

Temperature/Humidity Detection System Based on MSP 430 F 149

Real-Time and On-Line Measurement System for Trace Gas with Active Control Parameters

Design and Fabrication of a Mid-Infrared Carbon Dioxide Sensor for the Application in Greenhouse Environment

Design and Implementation a Real-Time Electronic Nose System

Design of greenhouse data acquisition system based on MSP430 and CC2530

Development of a differential mid-infrared carbon monoxide detection device

Differential Mid-Infrared Methane Detection System Based on Virtue Signal Processing Platform

Design and Implementation of Vehicle Exhaust Gas Analyzer in NDIR Method

A temperature-compensated CO2 detection system based on non-dispersive infrared spectral technology

Off-axis Integrated Cavity-enhanced Infrared Laser Carbon Dioxide Sensor System

Development of Mid-Infrared Trace-Co Detector with Long-Path Differential Optical Absorption Spectroscopy (Lp-Doas)