Abstract:Recently, increasing attention of researchers in the field of membrane technology has been paid to the development of membranes based on biopolymers. One of the well-proven polymers for the development of porous membranes is cellulose acetate (CA). This paper is devoted to the study of the influence of different parameters on ultrafiltration CA membrane formation and their transport properties, such as the variation in coagulation bath temperature, membrane shrinkage (post-treatment at 80 °C), introduction to casting CA solution of polymers (polyethylene glycol (PEG), polysulfone (PS), and Pluronic F127 (PL)) and carbon nanoparticles (SWCNTs, MWCNTs, GO, and C60). The structural and physicochemical properties of developed membranes were studied by scanning electron and atomic force microscopies, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and contact angle measurements. The transport properties of developed CA-based membranes were evaluated in ultrafiltration of bovine serum albumin (BSA), dextran 110 and PVP K-90. All developed membranes rejected 90% compounds with a molecular weight from ~270,000 g/mol. It was shown that the combination of modifications (addition of PEG, PS, PL, PS-PL, and 0.5 wt% C60) led to an increase in the fluxes and BSA rejection coefficients with slight decrease in the flux recovery ratio. These changes were due to an increased macrovoid number, formation of a more open porous structure and/or thinner top selective, and decreased surface roughness and hydrophobization during C60 modification of blend membranes. Optimal transport properties were found for CA-PEG+С60 (the highest water—394 L/(m2h) and BSA—212 L/(m2h) fluxes) and CA-PS+С60 (maximal rejection coefficient of BSA—59%) membranes.

Remarkable improvement of the performance of poly(vinylidene fluoride) microfiltration membranes by the additive of cellulose acetate

Influence of polyvinyl alcohol on the surface morphology, separation and anti-fouling performance of the composite polyamide nanofiltration membranes

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Improvement of PVDF composite membrane performance by using nanocrystals cellulose from waste pineapple leaf and g‐C3N4

Hydrophilic modification of PVDF microfiltration membranes by adsorption of facial amphiphile cholic acid.

Development and Study of Novel Ultrafiltration Membranes Based on Cellulose Acetate

Improved hydrophilicity and antifouling performances of PVDF ultrafiltration membrane via in situ cross-linking

High-Hydrophilic and Antifouling Poly (Vinylidene Fluoride) Composite Membranes via in Situ Mosaic- Assembled Nanocrystalline Cellulose and g-C3N4

A Facile Strategy toward the Preparation of a High-Performance Polyamide TFC Membrane with a CA/PVDF Support Layer

Modification of Polyvinylidene Fluoride (PVDF) Membrane by Polymer Blending with Phase Inversion Method

Surface Modification of Poly(vinylidene fluoride) Ultrafiltration Membranes with Chitosan for Anti-Fouling and Antibacterial Performance

Blending Polyvinylidene Difluoride with Copolymers of Carboxymethyl Betaine and Methyl Methacrylate to Develop Low-Fouling Microfiltration Membranes Via Non-Solvent Induced Phase Separation

Improved protein fouling resistance of PVDF membrane grafted with the polyampholyte layers

Explication of polydopamine modified g-C 3 N 4 as effective additive in PVDF nanocomposite membrane fabrication for enhanced ultrafiltration and self-cleaning performance

Improved PVDF Membrane Performance by Doping Extracellular Polymeric Substances of Activated Sludge

Hydrothermal carbon nanospheres assisted-fabrication of PVDF ultrafiltration membranes with improved hydrophilicity and antifouling performance

Enhanced permeability, mechanical and antibacterial properties of cellulose acetate ultrafiltration membranes incorporated with lignocellulose nanofibrils

Preparation and Properties of Cellulose Triacetate (CTA)-PVDF Composite Membrane with Hydrophobic/hydrophilic Properties for Membrane Distillation

Polyvinylidene Fluoride-Based Ultrafiltration Composite Membranes Via In-Situ Biomineralization

Study on the control of pore sizes of membranes using chemical methods