Abstract:Commercial three-way catalysts with high-activity and long-term durability are critical for the aftertreatment of compressed natural gas vehicle exhausts to meet increasingly stringent policy requirements, but high concentrations of CH4 and H2O in the exhaust gas make the catalyst susceptible to deactivation. In this work, a series of commercially deactivated and aged honeycomb Pt/Pd/Rh/CeO2-ZrO2/Al2O3 catalysts were obtained by dry-aging, hydrothermal-aging and engine bench-aging methods, and the effects of aging conditions on catalytic performance, surface composition and microstructure evolution were investigated. The combinations of H2-TPR, XRD, Raman, HRTEM, XPS and in situ DRIFTS of CO/CH4 characterizations confirmed that the stability of CeO2-ZrO2 solid solution structure is a key factor affecting the catalytic activity and durability. Hydrothermally-aged catalyst has a relatively stable CeO2-ZrO2 solid solution structure, which ensures a high dispersion of precious metal particles in the form of small particles on the catalyst surface. Dry-aged catalyst shows that more CeO2 crystals have been segregated from CeO2-ZrO2 solid solution, resulting in most precious metal particles in the form of agglomerates. For the deactivated catalysts after engine bench aging, the microstructure was significantly changed with a large number of CeO2 crystals detached from CeO2-ZrO2 solid solution, resulting in more active sites of Platinum Group Metal (PGM) being encapsulated. In situ DRIFTS of CH4 experiments showed that the process of generation and depletion of intermediate species (e.g., methoxy, formate and bicarbonate species) is a matching process. For the deactivated catalysts with fewer active sites, the subsequent reaction steps of these intermediate species to CO2 and H2O are hindered by the accumulation of stable formate and bicarbonate intermediate species.

Cu/ZnO/Al2O3 water–gas shift catalysts for practical fuel cell applications: the performance in shut-down/start-up operation

Cu/ZnO-based Water–gas Shift Catalysts in Shut-Down/start-up Operation

Effect of Cu Loading on Cu/ZnO Water–gas Shift Catalysts for Shut-Down/start-up Operation

Cu/ZnO Water-gas Shift Catalysts Calcined at Different Temperatures for Shut-down/Start-up Operation

Robust Au/Ce0.4zr0.6o2 Catalyst for Dynamic Shutdown/Startup of the Water-Gas Shift Reaction in Realistic Reformate with < 1% O-2

A comparative study of the deactivation mechanisms of the Au/CeO2 catalyst for water–gas shift under steady-state and shutdown/start-up conditions in realistic reformate

Highly Efficient Copper-Manganese Oxide Catalysts with Abundant Surface Vacancies for Low-Temperature Water-Gas Shift Reaction

Enhanced CuAl2O4 Catalytic Activity via Alkalinization Treatment toward High CO2 Conversion during Reverse Water Gas Shift Reaction

The active sites of Cu–ZnO catalysts for water gas shift and CO hydrogenation reactions

Highly stable CuFe1.2Al.8O4 catalyst with low CO selectivity for hydrogen production in HT‐PEMFCs application

Unveiling the Mechanism of Plasma-Catalytic Low-Temperature Water-Gas Shift Reaction over Cu/γ-Al2O3 Catalysts

Tuning the thermal activation atmosphere breaks the activity–stability trade-off of Fe–N–C oxygen reduction fuel cell catalysts

Thermal deactivation mechanism of the commercial Pt/Pd/Rh/CeO2-ZrO2/Al2O3 catalysts aged under different conditions for the aftertreatment of CNG-fueled vehicle exhaust

Challenging the Activity-Durability Tradeoff of Fe-N-C Fuel Cell Catalysts via Controlling thermal Activation Atmosphere

Stability of the Oxide-Zeolite (OXZEO) Composite Catalysts for Syngas Conversion to Gasoline

Single-chamber solid oxide fuel cells with nanocatalyst-modified anodes capable of in situ activation

Novel Bimetallic Cu–Pd Nanoparticles as Highly Active Low-Temperature WGS Catalysts

Syngas CO cleaning for fuel cell applications by preferential oxidation: catalyst development and reactor design

Catalytic enhancement of water gas shift reaction with Cu/ZnO/ZSM-5: Overcoming challenges of CO 2 and H 2 rich feeds

Anode Catalysts for Solid Oxide Fuel Cells That Run Directly on Hydrocarbon Fuels

Purification of hydrogen from carbon monoxide for fuel cell application over modified mesoporous CuO-CeO2 catalysts