Abstract:Aluminum alloys are extensively used in many fields such as aeronautics, astronautics, vehicle manufactures and living products clue to their good mechanical properties and anti-corrosion performance. Traditionally, the most effective corrosion protection technologies are based on the use of Cr6+ containing formulations to extend the applications of aluminum alloys in high corrosive media such as chlorides containing solutions. However, the recent recognition that chromates are highly toxic and carcinogenic has led to extensive research to develop new alternatives. Many works have been published using different conditions to obtain rare earth (RE) conversion layers on several aluminum substrates. Unfortunately, these reported anti-corrosion technologies based on RE modified films presented several drawbacks including long formation time, high formation temperature and even high potential in some cases. The goal of the present work is to introduce the novel cathode electrophoresis technique to quickly deposit cerium modified film on the surface of Al 5083. The morphology and structure of the RE. film were characterized by SEM, EDS and XRD, the corrosion resistance was investigated by EIS and potentiodynamic polarization curves in 0.1 mol/L NaCl solution. The results showed that uniform CeO2 film of 0.8 mu m thickness can be prepared by cathode electrophoresis process in 0.1 mol/L Ce(NO3)(3) ethanol solution at a voltage of 12 V for 60 s. Polarization curves confirmed its excellent protective property through inhibiting the cathodic reaction. Impedance data collected from EIS in 0.1 mol/L NaCl solution remained capacitive for 31 d, which indicated the lack of localized corrosion. With the increase of exposure time, the charge-transfer resistance R-p became higher, the surface capacitance C-t nearly kept constant and cracks of the film reduced obviously, demonstrating a self-healing property. Apparently local cathodes were covered during the RE modification processes, thereby reducing the driving force for pitting.

CORROSION INHIBITION MECHANISM OF CERIUM(Ⅲ) FOR ALUMINUM ALLOY

Corrosion Inhibiton Mechanism of Cerium(III) for Aluminum Alloy

Effect of Ce on corrosion behaviors of aluminum in 3.5% NaCl solution

Cerium-based Chemical Conversion Coating on Aluminum Alloy to Inhibits Corrosion in Chloride Solution

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

Influence of Cerium Content on the Corrosion Behavior of Al-Co-Ce Amorphous Alloys in 0.6 M NaCl Solution

An Investigation of Inhibition Mechanism of Cerium for Aluminum Alloy 2024-T3

Localized Corrosion and Corrosion Inhibitor of Al-alloy AA6061 Beneath Electrolyte Layers

Characterization and Cathode Electrophoresis Deposition of Cerium Modified Films on Al 5083

Corrosion Inhibition of 3003 Aluminum Alloy by Cerium Chloride-Sodium Nitrite Blend in Flue Gas Condensate

Synergistic Effect Between Glutamic Acid and Rare Earth Cerium (III) As Corrosion Inhibitors on AA5052 Aluminum Alloy in Neutral Chloride Medium

Cerium Compounds Coating as a Single Self-Healing Layer for Corrosion Inhibition on Aluminum 3003

Corrosion Inhibition Mechanism of Rare Earth Metal on LC4 Al Alloy with Split Cell Technique

Influence of Cerium on Anode Structure and Electrochemical Performance of Aluminium Alloy

A RESEARCH ON Ph DURING THE PROCESSION OF THE CERIUM(Ⅲ)FILM FORMATION OF ALUMINUM ALLOYS BY EIS

Changes of Corrosion Electrochemical Behavior of Cerium Nitrate Doped GPTMS/TEOS Silane Hybrid Films with Immersion Time

Effect Of Adding Rare-Earth Cerium On The Microstructure And Acid Rain Corrosion Resistance Of The Adc12 Alloy

Synergism Between Cerium Nitrate and Sodium Dodecylbenzenesulfonate on Corrosion of AA5052 Aluminium Alloy in 3 Wt.% NaCl Solution

Corrosion resistance of cerium-based conversion coatings on alumina borate whisker reinforced AA6061 composite

Effect of Ce on the Microstructure and Corrosion Resistance of Al-5Mg-3Zn-1Cu Alloy

Corrosion Behaviour of Sol–gel Coatings Doped with Cerium Salts on 2024-T3 Aluminum Alloy