Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

Application of welding numerical simulation on the hydro-runner

Research of Welding Residual Stress of Francis Turbine Runner

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Virtual Optimization of Regulating and Controlling on Welding Residual Stress of Francis Turbine Runner

Influence of Local Heating on Welding Residual Stress of Francis Turbine Runner

Finite element simulation of welding process and real-time monitoring assessment

Influence of Local Peening on Welding Residual Stress of Francis Turbine Runner

Effect of Welding Technologies on Decreasing Welding Residual Stress of Francis Turbine Runner

Effect of Preheat Temperature and Welding Sequence on the Temperature Distribution and Residual Stress in the Weld Overlay Repair of Hydroturbine Runner

Analysis on Runner Welding Residual Stress Affected by Local Heating

Numerical Simulation of Welding Residual Stress of Tube-to-tubesheet Joint in Heat Exchangers

Numerical Investigation on Stress Distribution and Evolution in 9cr/2.25cr Dissimilar Welded Rotor Undergoing Welding and Heat Treatment

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Numerical simulation of residual stress in post internal-welding process of bimetal composite pipe and optimization of welding sequence

Numerical Analysis of Welding in Fillet Weld for High-Pressure Pipeline In-Service

Welding residual stress analysis of the X80 pipeline: simulation and validation

Numerical Simulation Of Fluid Flow And Temperature Field In Keyhole Double-Sided Arc Welding Process On Stainless Steel

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints

3D finite element analysis and optimization of welding residual stress in the girth joints of X80 steel pipeline

Numerical Simulation on Residual Stress of Steel Rail Longitudinal Stainless Steel Overlaying Welding