Ultrathin and Pressure-Resistant Meta-Coating with Embedded Tree-Shaped Acoustic Black Hole for Broadbnd Low-Frequency Underwater Sound Absorption
Yanni Zhang,Manlin Tong,Xiaoting Rui,Guoping Wang,Fufeng Yang,Qinbo Zhou,Li Cheng,Bin He
DOI: https://doi.org/10.1016/j.apacoust.2024.110171
IF: 3.614
2024-01-01
Applied Acoustics
Abstract:Acoustic coating is the main technical means to absorb incoming sound from detection sonars. Considering the advance of sonar technology to cope with low frequencies and the underwater working environment, acoustic coatings are required to provide effective broadband low-frequency sound absorption (SA) under hydrostatic pressure. However, current underwater acoustic coating materials have poor low-frequency broadband SA performance, especially under hydrostatic pressure. Herein, we propose an ultrathin meta-coating with tree-shaped acoustic black hole (ABH) units embedded in an elastomer matrix. Each tree-shaped ABH unit consists of multi-scale ABH plates as scatterers, a center-support column as "trunk" and a frame as "skeleton". This design combines the rich dynamics of multi-scale ABH plates, the pressure-resistance characteristics of the frame and the column, and the damping of the matrix, to collectively lead to superior performance. Capitalizing on the rich local and coupled large-amplitude local resonances of the unit, and strong resistance to static-pressure-induced deformation, high and quasi-perfect SA is achieved in multiple and ultra-wide low-frequency bands at a deep subwavelength scale under different hydrostatic pressures. Notably, quasi-perfect SA (>0.92) is achieved at 500 Hz with a meta-coating whose thickness is 2 % of the sound wavelength. The quasi-perfect SA is also demonstrated experimentally within 1200-7500 Hz, which persists till 1.0 MPa. The SA is still above 0.6 from 3-10 kHz at 4.5 MPa. For SA model under hydrostatic pressures, hyperelastic constitutive model and pressurized dynamic mechanical parameters of the matrix were established. Numerical results are then verified by experimental tests under different hydrostatic pressures. With both high local-modal densities and hydrostatic-pressure resistance, this design represents a new type of acoustic metamaterials and promises broad underwater applications.