Abstract:Steel used in the automotive industry must strike a delicate balance between strength and ductility to maintain the structural integrity of vehicles and achieve intricate designs. Traditional methods of reducing weight by using high-strength low-carbon steels have limitations. As a result, a new dual-phase lightweight steel with an austenite-ferrite structure and the composition Fe-0.52C-11Mn-5.14Al-1Cr was developed. The relationship between the microstructure and mechanical properties of this lightweight steel, which underwent various annealing processes (700°C-1000°C) after cold rolling, was examined using specialized equipment like a universal testing machine, electron microscopy, and X-ray diffractometer. The findings reveal that the cold-rolled test steel (CR) exhibits high tensile strength (1500 MPa) but low elongation at break (3.9%). The performance of the experimental steel post-annealing treatment has shown significant improvement, with the average grain size increasing with higher annealing temperatures. The γ phase generally shows an increasing trend, with finer grains post-annealing, and the distribution of the α phase displays a consistent pattern along γ boundaries. Additionally, a substantial number of annealing twins appear in the matrix. These twin boundaries absorb some dislocations, and slip leads to the movement of twin boundaries, effectively reducing stress concentration from deformation and enhancing the ability of twin boundaries to accommodate plastic strain, creating twin dislocation interaction. The interplay among dislocations, stacking faults, and twins regulates the balance between strength and plasticity. Following treatment at 850°C × 1 min + 500°C × 3 min, the steel displays excellent mechanical properties, including ultimate tensile strength (836 MPa), elongation (53%), and strength-ductility product (43723 MPa·%). This study identifies a specific heat treatment parameter that achieves a harmonious equilibrium between outstanding strength and plasticity (strength-ductility product) within the designed composition.

Study on Integrated Plasticity of Low-carbon Low-alloy Steel During Intercritical Annealing Followed by Subcritical Annealing

Parameters Optimization of Low Carbon Low Alloy Steel Annealing Process

The influence of annealing temperature on the microstructure and mechanical properties of Fe-0.52C-11Mn-5.14Al-1Cr lightweight Steel

Regulation on Annealing Multiscale Laminar Structure and Mechanical Characteristics of Plain Medium Carbon Steel by Warm Pre-deformation Extent

Achieving an excellent combination of strength and plasticity in a low carbon steel through dynamic plastic deformation and subsequent annealing

Annealing Softening Behaviour of Cold-Rolled Low-Carbon Steel with a Dual-Phase Structure and the Resulting Tensile Properties

Achieving High Plasticity and High Toughness of Low-Carbon Low-Alloy Steel through Intercritical Heat Treatment

The impact of intercritical annealing temperature on microstructure and mechanical properties of an ultra-low carbon medium manganese heavy steel plates

Enhancing Both Strength and Ductility of Low-Alloy Transformation-Induced Plasticity Steel Via Hierarchical Lamellar Structure

Microstructure and Mechanical Properties of Low- and Medium-Carbon Si-Rich Low-Alloy Steels Processed by Austemping after Intercritical Annealing

Influence of Annealing and Aging Parameters on the Microstructure and Properties of 1200 MPa Grade Cold-Rolled Dual-Phase Steel

Determining role of heterogeneous microstructure in lowering yield ratio and enhancing impact toughness in high-strength low-alloy steel

Effect of Annealing on Microstructure and Corrosion Behavior of Interstitial Free Steel

Effect of Low-Temperature Intercritical Annealing Time on Microstructure and Properties of 22mnb5 Steel

Effect of Intercritical Heat Treatment on Microstructure, Nano-Size Precipitation and Mechanical Properties of Fe–Ni–Cu–Al Low Carbon Steel

Effect of Annealing Temperature and Time on Microstructure Evolution of 0·2c–5mn Steel During Intercritical Annealing Process

Evolution of Microstructure, Properties, and Fracture Behavior with Annealing Temperature in Complex Phase Steel with High Formability

Microstructure evolution and compressive properties of a low carbon-low alloy steel processed by warm rolling and subsequent annealing

Atom-probe tomographic and dilatometric studies of phase-transformations after inter-critical annealing of a low-carbon dual-phase steel

Tailoring Strength and Ductility of a Cr-Containing High Carbon Steel by Cold-Working and Annealing

Effect of Annealing Process on Microstructure and Mechanical Properties of Super Fine Grain IF Steel