Abstract:Numerical investigations of combined impingement and film cooling based on different turbulence models have been carried out and compared in the present study. The specific test case combines the complex flow physics of the jet impinging, turning and subsequent mixing with hot mainstream, which consists of jet shear layer separation, wall boundary layer transition, coolant jet detachment and reattachment. The turbulence models employed are the k  − standard, RNG, and realizable models, the k − standard, SST, and Transition SST models, and the t l k − k − model. Numerical tests have been performed at three representative blowing ratios from low to high for each turbulence model. The computed cooling effectiveness from  equation models tend to be underpredicted at low blowing ratio while numerical profiles of cooling effectiveness achieve considerable agreement with the measured experiment data at moderate and high blowing ratios. In addition, the computed results from  equation models reasonably match the measured data at low blowing ratio but cooling effectiveness are markedly underpredicted at moderate and high blowing ratios. In contrast, those results from the t l k − k − model agree fairly well with those of the experiment at various blowing ratios. Owing to the nature description of the pre-transitional streamwise fluctuations in the laminar kinetic energy, the solutions from t l k − k − model clearly reveal the complex flow physics in the combined impinging and film cooling in the confined region, where the jet shear layer separation, boundary layer transition, coolant detachment and reattachment co-exist. However, the large number of specified parameters in the t l k − k − model still needs to be further optimized to reach the enhanced agreement with experimental data and obtain extensive applications for combined cooling schemes.

Numerical Simulation of Transient 3-D Turbulent Heated Jet into Crossflow in a Thick-Wall T-junction Pipe

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

Investigating Thermal Mixing and Reverse Flow Characteristics in a T-junction Using CFD Methodology

Numerical Study on Heat Transfer of an Impinging Turbulent Plane Jet with Confined Wall.

Numerical Simulation of Fluid Flow and Heat Transfer Processes

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

Numerical Analysis of Buoyancy-Driven Exchange Flow with Regard to an HTTR Air Ingress Accident

Numerical Study of Turbulent Jet in Cross-flow

Experimental and Numerical Investigations of Extended Jet Effects on Multiple-Jet Impingement Heat Transfer Characteristics

Three-Dimensional Simulation of Turbulent Rectangular and Square Impinging Jet Flows

Numerical Simulations of Transverse Liquid Jet to a Supersonic Crossflow Using a Pure Two-Fluid Model

Numerical Simulation Studies on Multiphase Flow in High Temperature Wind Tunnel Contractions and Experimental Sections

Numerical Simulation of the Flow and Heat Transfer Characteristics of Sweeping and Direct Jets on a Flat Plate with Film Holes

Numerical Study on Flow and Heat Transfer Characteristics of 3D Turbulent Impinging Jets

Transverse Jet Interaction with Hypersonic Crossflow I: Experimental and Numerical Investigations

A developed transition simulation model for turbulent plane jet impingement heat transfer

NUMERICAL PREDICTION OF A RECTANGULAR TURBULENT JET IN A CROSS FLOW

NUMERICAL INVESTIGATION OF DIFFERENT TURBULENCE MODELS APPLIED IN COMBINED IMPINGEMENT AND FILM COOLING