Abstract:Skull reconstruction using cranial implants is often required for repairing skull defects caused due to trauma, diseases, or malignancy to protect intracranial structures. For relieving Intracranial Pressure (ICP) surgeons restore cranial defects either using natural bones or fabricated custom cranial implants. With the increase in Traumatic Brain Injuries (TBI) and challenges faced by TBI patients to regain normalcy, it is imperative to analyse the mechanical behaviour of skull-implant assemblies under some Head Injury Criteria (HIC). Medical grade materials including Titanium Alloys (Ti-6Al-4V) and Polyether-ether-ketone (PEEK) are used by fabricating Patient-Specific Implants (PSI) manufactured using 3D imaging, modelling and printing techniques. 3D technologies are preferred over conventional manufacturing methods, as they enable fabrication of custom shapes, sizes and properties for these PSI. For an effective attachment of PSI with a defective skull, a stable joint and plate arrangement as fixture plates is necessary at their interface. These fixtures can have variable numbers, design shapes, materials and location arrangements. This paper presents the Finite Element Method/Analysis (FEM/FEA) study of PSI attached to a defected skull for reconstruction, with linear shaped fixture configuration, when subjected to an external dynamic loading at 5 m/s, strain rate of 10s-1 to 243s-1 and ICP of 15mm Hg from three sides of the skull faces. Three different materials as Neoprene (soft), Concrete (medium rigid) and E-Glass (highly rigid) have been used, in the form of a rectangular thin cuboidal wall structure, at an angle of 45° with the skull face. Four linear shaped fixture plates which were simplest to design, were used to attach the PSI-skull assembly, to ensure that weight of the PSI-fixation assembly on the patient remains minimal, overall assembly has symmetrical fixations and efforts required by a surgeon for fitment of these plates remain minimal. Placement of these fixture plates has been optimized to encompass the complete PSI-skull interface section, due to which the stresses within all the assembly components (PSI, fixture plate and skull) reduced by nearly 2.5 times than the initial design and remained within yielding limits, thereby, averting any failure under heavy external dynamic loading.

Deformation of skull bone as intracranial pressure changing

Establishment of Three-Dimensional Cranial Cavity Model and the Finite Element Method for Analyzing the Skull Deformation with Changing Intracranial Pressure

Viscoelastic Finite-element Analysis of Human Skull and Duramater with the Changing Intracranial Pressure

Strain Analysis on the Superficial Surface of Skull As Intracranial Pressure Changing

Amendment on the Strain Measurement of Thin-Walled Human Skull Shell As Intracranial Pressure Changes

Study on the matrix and stress-strain relationship of laminated structure in the cranial cavity with the changing intracranial pressure

Viscoelastic Finite-Element Analysis of Human Skull-Dura Mater System As Intracranial Pressure Changing

Tissue modeling and analyzing for cranium brain with finite element method

Revealing the Effect of Skull Deformation on Intracranial Pressure Variation During the Direct Interaction Between Blast Wave and Surrogate Head

The Construction and Validation of a Finite Element Human Head Model for Skull Fracture

New Minitraumatic Method for a Simulation of Continuous Intracranial Pressure Curves with Strain Electrometric Technology in Rats

Finite Element Analysis on Strains of Viscoelastic Human Skull and Duramater

Potential Therapeutic Actions Of Hypothermia: Finite-Element Simulation Of Human Skull Deformation With Hypothermia Treatment

A modified human head model for the study of impact head injury

Prediction of brain deformations and risk of traumatic brain injury due to closed-head impact: quantitative analysis of the effects of boundary conditions and brain tissue constitutive model

Theoretical Prediction Model and Failure Mechanism Map of Human Skull Porous Structures with Quasi-Static Bending Performance

BIOMECHANICAL MODELLING OF THE HUMAN SKULL STRESS STATE UNDER IMPACT BY CYLINDRICAL SOLID

Investigation of the relationship between facial injuries and traumatic brain injuries using a realistic subject-specific finite element head model

Mechanical behaviour of reconstructed defected skull with custom PEEK implant and Titanium fixture plates under dynamic loading conditions using FEM

Quantification and Statistical Analysis on the Cranial Vault Morphology for Chinese Children 3–10 Years Old

Effects of head size and morphology on dynamic responses to impact loading