Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

Corrosion Behavior of 35crmn and Q235 Steel in Simulated Acid Rain Conditions

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Corrosion and Runoff Behavior of Carbon Steel in Simulated Acid Rain

Study on Degradation Law and the Equivalent Thickness Model of Steel Subjected to Sulfate Corrosion

Corrosion Behavior of Q235 Steel in Atmospheres Containing SO2 and NaCl

Evolution of Corrosion Products of Carbon Steels and Galvanized Steel in Simulated Marine Atmosphere

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Corrosion Behavior of Q235 in Simulated Natural Environment by Electrochemical Technology

Influence of Cathode Protection on Corrosion Resistance of Q235 Steel in Lanzhou Soil

Corrosion Behavior of Ly12cz Aluminum Alloy in Simulated Acid Rain Solution

A STUDY OF ELECTROCHEMICAL IMPEDANCE SPECTRUM FOR CORROSION BEHAVIOR OF LY12 ALUMINUM ALLOY IN SIMULATED ACID RAIN

The Behavior of Corrosion and Runoff of A3 Steel in Artificial Rainwater

Study on Corrosion Behavior of Carbon Steel and Weathering Steel in Salt Spray Test

Study on Corrosion Inhibition Performance and Mechanism of Quinoline Quaternary Ammonium Salt and L-methionine on Pre-corrosion Q235 Steel

Effect of Al alloying on corrosion performance of steel

A comparative study on the corrosion behavior of Q235 steel in saturated acidic red and yellow soils

Corrosion behavior of weathering steel in marine atmosphere

A Comparative Study of the Corrosion Behavior of 30CrMnSiNi2A in Artificial Seawater and Salt Spray Environments

Corrosion of Q345B Steel in Soil Solution Extract Containing Chloride Ions

Influence of Cl- and SO2 on Carbon Steel Q235, Pipeline Steel L415 and Pressure Vessel Steel 16MnNi Corrosion Behavior in Industrial and Marine Atmosphere Environment