Abstract:Corrosion of metallic structures widely existed in multiple industries, such as oil and gas, civil infrastructure, aerospace, mechanical, mining, and processing. Current available corrosion-monitoring methods are based on different sensing principles, which have their own advantages, and some drawbacks that may limit their application on some aspects. This article presents an electromechanical impedance-instrumented corrosion-measuring probe for corrosion monitoring. The proposed probe is fabricated by attaching a circular lead zirconate titanate patch onto a metal rod. Compared to other electromechanical impedance-based corrosion-monitoring methods, the probe is capable of isolating the influence of structural complexity, variations in loading and boundary conditions. Five probes were fabricated in the experimental study and three of them were subjected to accelerated corrosion tests to mimic the corrosion-induced mass loss damage. Results showed that the peak magnitude of the conductance signatures was reduced with the increase in corrosion amount. The variations in the conductance signatures were quantified by three statistical quantifying metrics, that is, root-mean-square deviation, mean absolute percentage deviation, and correlation coefficient deviation. All these metrics increase with the increase in corrosion amount, which can be used as an indicator of the corrosion process. This study proves that the proposed corrosion-measuring probe is effective in monitoring corrosion and shows promising application potential. This research also serves as a proof-of-concept study to demonstrate the capability of the electromechanical impedance technique in monitoring mass loss due to corrosion.

Technical Note: Research and Development of Localized Corrosion Rate Monitoring Instrument for Nonpassivable Metal in Corrosive Media

Combining Localized Surface Plasmon Resonance with Anodic Stripping Voltammetry for Heavy Metal Ion Detection

Improved Magnetic-Based Apparatus Enables Non-Destructive and High Sensitive Steel-Bar Corrosion Detection

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

An Electrochemical Method for Measuring Localized Corrosion under Cathodic Protection

Corrosion Measurement of the Atmospheric Environment Using Galvanic Cell Sensors

An Electromechanical Impedance-Instrumented Corrosion-Measuring Probe

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

Study on the Real-Time Dynamic Monitoring of Corrosion Rate of Reinforcement in Carbonation Environment

A New Experimental Method for in Situ Corrosion Monitoring under Alternate Wet-Dry Conditions.

Monitoring of Chloride-Induced Corrosion in Steel Rebars

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Optimization Design of A Corrosion Monitoring Sensor by Fem for Rc Structures

Localized corrosion of low-carbon steel at the nanoscale

Development of a Novel Corrosion Sensor Based on Electromechnical Impedance Instrumented Piezoelectric-Metal Transducer

Exploratory Research on Ultra-Long Polymer Optical Fiber-Based Corrosion Sensing for Buried Metal Pipelines

Corrosion Monitoring of Reinforcing Steel in Concrete by Electrochemical Sensors

Calculations of the Cathodic Current Delivery Capacity and Stability of Crevice Corrosion under Atmospheric Environments

In-situ AFM and quasi-in-situ studies for localized corrosion in Mg-9Al-1Fe-(Gd) alloys under 3.5 wt.% NaCl environment

An Electromechanical Impedance-Based Sensor for Monitoring the Pitting Corrosion of Steel: Simulation with Experimental Validation