Numerical investigation of effects of secondary oxygen ratio on performance of staged-entrained flow coal gasifier

Yuxin WU,Chunrong CAI,Jiansheng ZHANG,Guangxi YUE,Junfu L(U)
DOI: https://doi.org/10.3969/j.issn.0438-1157.2012.02.005
2012-01-01
Abstract:The staged oxygen entrained flow coal-slurry gasifier has such advantages as higher carbon conversion rate,stronger turbulent mixing inside gasifier and lower temperature near coal slurry nozzle.In this paper,the effects of secondary oxygen mass flow rate(SOMFR)on gasification performance were numerically investigated through CFD simulation.The CFD model was based on the Euler-Lagrangian method.Realizable k-ε model was used to acquire the turbulent information in the gasifier.Presumed PDF method was adopted to consider interactions between turbulence and homogeneous reactions.The characteristics of the gasification flames were analyzed as well as the flow field under different SOMFR in the staged gasifier.As SOMFR decreased,the secondary gasification flame curved up with backflow near the wall.At the same time,dome wall temperature increased as well.When SOMFR was less than 8% of the total oxygen mass flow rate,the momentum flux of the secondary oxidizer is too low to change the macro flow field.When SOMFR was larger than 8% of the total oxygen mass flow rate,the recirculation region shrank due to the entrainment of secondary flow.However,particle residence time increased,since the velocity in back-flow region increased.Particle gasification process would be benefited from this change.As SOMFR increased,the down-flow flame length decreased as well as the average temperature in the top furnace region.The result showed that the average temperature decreased by 20℃ when SOMFR increased from 2% to 16% of the total oxygen mass flow rate.At the height where secondary oxygen was introduced,the average temperature increased by 300℃ as well.In all cases,the temperature flow field at the down-section of the gasifier did not change,since the oxygen-coal mass ratio was kept constant.
What problem does this paper attempt to address?