Abstract:The Self-sensing Active Magnetic Bearings (SSAMBs) which feature for the simplification of independent displacement sensors, contribute to both cost reduction and convenience in control and assembly. The key point of this technique is to accurately estimate rotor position signals directly from coil voltages or currents, thus the actuator itself also serves as a virtual displacement sensor. Although several feasible approaches have been proposed to realize the self-sensing process, there still lie limitations in estimation accuracy, robustness and dynamic performance of the system. In fact, due to the nonlinear property of the self-sensing process, few accurate models are available for quantitative analysis of the estimation accuracy, and this restricts further development of this technique. Focusing on the modulation type SSAMBs, an accurate analytical model of the self-sensing in frequency domain is firstly established in this paper. Eddy current effects and filter properties are also considered for better accuracy. Based on this model, we evaluate possible estimation error sources during the self-sensing process, and investigate if the estimation accuracy can be improved fundamentally by selecting main system parameters properly. In this way, the estimation accuracy gets further improved under existing compensation methods, and better system robustness and dynamic performance can be achieved. Finally, the analytical model and associated conclusions are validated through static experiment, 4-Degree of Freedom (DOF) self-sensing rotor levitation experiment and 0-5000 rpm rotating operation experiment on a 4-DOF rigid rotor-radial SSAMBs platform. (C) 2016 Elsevier B.V. All rights reserved.

The Simulation Conctrol of The Magnetic Bearings Based on Virtual Prototype

Design and Simulation of the Hybrid Permanent Magnetic Bearings Control System

Modeling and Design of a 3-DOF Magnetic Bearing with Toroidal Radial Control Coils

Active Control of Bearing Force Transmissibility for Active Magnetic Bearings-rigid Rotor Systems

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Novel Decoupling Control and Eigenstructure Assignment Strategies for Rigid Active Magnetic Bearing Rotor System

Sliding Mode Control Based on Linear Quadratic Regulator for an Active Magnetic Bearing Flexible Rotor Virtual Collocated System

Computer-Aided Simulation Analysis of a Novel Structure Hybrid Magnetic Bearing

All-coefficient Adaptive Control of Active Magnetic Bearing System Based on Characteristic Model

Study on Inverter-fed Three-pole Active Magnetic Bearing

A Coupling Simulation of Converter Field Circuit for Active Radial Electromagnetic Bearing Based on Simplorer and Maxwell

Vibration Control of an Active Magnetic Bearings Flexible Rotor System Based on Adaptive Recursive Least Square Algorithm

Adaptive fuzzy controller with intelligent integrator in active magnetic bearing systems

Modeling and Design of Permanent Magnet Biased Radial-Axial Magnetic Bearing by Extended Circuit Theory

Implicit Generalized Predictive Control of an Active Magnetic Bearing System

The Effect of Controllers on the Dynamic Behaviour of a Rotor Supported on Active Magnetic Bearings

Internal model control for the AMB high-speed flywheel rotor system based on modal separation and inverse system method

Modeling and Decoupling Control of Conical Magnetic Bearings

Modeling and Simulation of Vector Control System for Permanent Magnet Syschronous Motors