Abstract:Hybrid silica monoliths functionalized with octyl groups and dedicated to chromatographic separations in the reversed-phase mode were directly synthesized within capillaries according to the protocol described by Yan et al. [L.J. Yan, Q.H. Zhang, Y.Q. Feng, W.B. Zhang, T. Li, L.H. Zhang, Y.K. Zhang, J. Chromatogr. A 1121 (2006) 92]. Although these monoliths allowed reaching high efficiencies in capillary electrochromatography (CEC), serious limitations prohibited their application in nano-liquid chromatography (nano-LC). Such limitations observed as poor performances in the nano-LC mode and the lack of reproducibility of the synthesis were related to the longitudinal morphological inhomogeneities of the hybrid material along the capillary. Thus, several modifications were conducted in the synthesis protocol in order to improve the resulting morphology of the monolith making it suitable for nano-LC separations. The influence of several critical parameters (such as the addition temperature of the basic catalyst and the hydrolysis duration) on the textural and chromatographic properties had been extensively studied. It was found that a decrease (i.e. 0 degrees C) of the temperature addition of the basic catalyst associated with a shorter hydrolysis duration (1h instead of 6h) allowed (i) delaying the gelation time and consequently facilitating the capillary filling step, (ii) increasing the structural homogeneity of the hybrid monoliths, i.e. their chromatographic performances in nano-liquid chromatography also (iii) greatly improving the reproducibility of the synthesis within the capillary without impairing the material's carbon load, i.e. the incorporation of the less hydrolysable C(8) precursor. The resulting hybrid monoliths afforded retention factors comparable to that previously obtained for C(18) grafted silica monoliths and efficiencies that are the best ever recorded in nano-LC with hybrid monoliths and that are close to the ones achieved with grafted silica monoliths. In fact, this modified protocol allowed a significant improvement of the performances in nano-LC which could be observed by the decrease of the mean value of H(min) going from 123 microm (Yan's protocol) to 24 microm (modified protocol) for a same length of capillary (l = 8.5 cm). In addition, the reproducibility of the synthesis was greatly improved through a factor six of reduction on the calculated standard deviation of these efficiencies. The high permeability and longitudinal homogeneity of the synthesized monolith allowed increasing the capillary length (for example, a 75-cm capillary was conveniently filled with hybrid silica monolith) and the column could be eluted at a very low backpressure leading to chromatographic performances up to 40,000 plates. Finally, the good efficiencies in the nano-LC mode combined with the excellent performances already present in the CEC mode led to fast (less than 1 min) and high efficient separations in the pressurized capillary electrochromatography (p-CEC) mode.

Direct Synthesis of Hierarchical Monolithic Silica for High Performance Liquid Chromatography.

Double-Templating Synthesis of Hierarchical Meso-Macroporous Silica Monolith

Preparation of monolithic silica HPLC columns with truss-structured skeletons and embedded surfactant-templated mesopores

Synthesis of hierarchically porous zirconium-based metal-organic framework@silica core-shell stationary phase through etching strategy for liquid chromatography

Use of Gel-Casting to Prepare HPLC Monolithic Silica Columns with Uniform Mesopores and Tunable Macrochannels

Synthesis of Highly Dispersed Mesostructured Cellular Foam Silica Sphere and Its Application in High-Performance Liquid Chromatography

High-Surface-Area Zeolitic Silica with Mesoporosity

Hierarchically macro/mesoporous silica monoliths constructed with interconnecting micrometer-sized unit rods

Incorporation of silica nanoparticles into porous templates to fabricate mesoporous silica microspheres for high performance liquid chromatography applications

Spontaneous Preparation Of Hierarchically Porous Silica Monoliths With Uniform Spherical Mesopores Confined In A Well-Defined Macroporous Framework

Hierarchical Lotus Leaf-Like Mesoporous Silica Material with Unique Bilayer and Hollow Sandwich-Like Folds: Synthesis, Mechanism, and Applications

Large-pore Mesoporous Silica Spheres: Synthesis and Application in HPLC

Optimization of the single-step synthesis of hybrid C(8) silica monoliths dedicated to nano-liquid chromatography and capillary electrochromatography

Superhydrophobic conjugated microporous polymers grafted silica microspheres for liquid chromatographic separation

Synthesis, Characterization and Application of Novel Bicontinuous Mesoporous Silica with Hierarchical Pore Structure

Design and fabrication of fluorous monoliths with tunable surface property for capillary liquid chromatography

Two-dimensional MOF Cu-BDC nanosheets/ILs@silica core-shell composites as mixed-mode stationary phase for high performance liquid chromatography

Fabrication of spherical silica amino-functionalized microporous organic network composites for high performance liquid chromatography

"One-pot" process for fabrication of organic-silica hybrid monolithic capillary columns using organic monomer and alkoxysilane.

A composite hydrogel modified silica stationary phase for mixed‐mode liquid chromatography

Click postsynthesis of microporous organic network@silica composites for reversed-phase/hydrophilic interaction mixed-mode chromatography