Abstract:Mixed electronic and ionic conductivity (MIEC) perovskite oxides hold promise as cathode with high oxygen reduction reaction (ORR) activity for solid oxide fuel cells (SOFCs) operating at reduced temperatures. However, these MIEC cathodes usually contain lanthanide or alkaline-earth elements at A-site. These elements tend to interact with yttria-stabilized zirconia electrolyte (YSZ) to form unwanted phases such as La2Zr2O7 and SrZrO3 at conventional electrode fabrication conditions (>800 degrees C). Such unwanted interfacial reaction severely degrades the cell performance. We present a new method to assemble SrCo0.4Fe0.5W0.1O3-delta (SCFW) directly onto YSZ by a highly efficient microwave plasma technique. Intimate contact between SCFW and YSZ phases can be achieved by ten-minute microwave-plasma treatment with no new phase formation. Consequently, the microwave-plasma fabricated interface exhibits a notably high ORR performance, showing an area-specific resistances of 0.11 Omega cm(2) at 600 degrees C, about two orders of magnitude better than the equivalent prepared via the conventional method. Our method is also effective in assembling other MIEC perovskite cathodes such as SrCo0.5Fe0.5O3-delta and SrCo0.8Nb0.1Ta0.1O3-delta on YSZ electrolyte, achieving notable enhancement of the cathode performance. This study thus provides an effective and convenient method for synthesizing reactive and robust interfaces between two incompatible phases with minimized interphase interactions. (C) 2021 Published by Elsevier Inc.

Mechanical Activation‐Assisted Synthesis of Pb(Fe2/3W1/3)O3

Determining the Electrochemical Activation Mechanism of Prussian Blue Analog Precatalysts for a High-Efficiency Oxygen Evolution Reaction

Preparation and Characterization of MnFe2O4 by a Microwave-Assisted Oxidative Roasting Process

The hydrothermal synthesis and formation mechanism of single-crystalline perovskite BiFeO3 microplates with dominant (012) facets

Synthesis of PbZrO3 Powder by a COprecipitation Method

Effects of Mechanical Activation on the Formation of PbTiO3 from Amorphous Pb–Ti–O Precursor

Photocatalytic Performance Study of Organophosphorus-Doped Tungsten Trioxide and Composite Materials

Pressure Induced Amorphization of Pb 2+ and Pb 4+ in Perovskite PbFeO 3

Realizing Ultrafast Oxygen Evolution by Introducing Proton Acceptor into Perovskites

Microwave Plasma Rapid Heating Towards Robust Cathode/electrolyte Interface for Solid Oxide Fuel Cells

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Synthesis Of Perovskite Pb(Zr0.52ti0.48)O-3 (Pzt) Powders By A Modified Coprecipitation Method

Mixed Conducting Perovskite Materials As Superior Catalysts for Fast Aqueous-Phase Advanced Oxidation: A Mechanistic Study

Reverse Atom Capture on Perovskite Surface Enabling Robust and Efficient Cathode for Protonic Ceramic Fuel Cells

Synthesis of perovskite Pb(Zr0.52Ti0.48)O3 (PZT) powders by a modified coprecipitation method

Tungsten doped FeCoP2 nanoparticles embedded into carbon for highly efficient oxygen evolution reaction

Tuning electronic property and surface reconstruction of amorphous iron borides via W-P co-doping for highly efficient oxygen evolution

Controlled synthesis of quasi-single-crystal lead dioxide by polyvinylpyrrolidone for enhanced electrochemical ozone production

Microwave shock motivating the Sr substitution of 2D porous GdFeO 3 perovskite for highly active oxygen evolution

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Mechanical Activation‐Assisted Synthesis of Pb(Fe2/3W1/3)O3

Determining the Electrochemical Activation Mechanism of Prussian Blue Analog Precatalysts for a High-Efficiency Oxygen Evolution Reaction

Preparation and Characterization of MnFe2O4 by a Microwave-Assisted Oxidative Roasting Process

The hydrothermal synthesis and formation mechanism of single-crystalline perovskite BiFeO3 microplates with dominant (012) facets

Synthesis of PbZrO3 Powder by a COprecipitation Method

Effects of Mechanical Activation on the Formation of PbTiO3 from Amorphous Pb–Ti–O Precursor

Photocatalytic Performance Study of Organophosphorus-Doped Tungsten Trioxide and Composite Materials

Pressure Induced Amorphization of Pb 2+ and Pb 4+ in Perovskite PbFeO 3

Realizing Ultrafast Oxygen Evolution by Introducing Proton Acceptor into Perovskites

Microwave Plasma Rapid Heating Towards Robust Cathode/electrolyte Interface for Solid Oxide Fuel Cells

Synthesis of Perovskite Pb(Zr&lt;sub&gt;0.52&lt;/sub&gt;Ti&lt;sub&gt;0.48&lt;/sub&gt;)O&lt;sub&gt;3&lt;/sub&gt; (PZT) Powders by a Modified Coprecipitation Method

Synthesis Of Perovskite Pb(Zr0.52ti0.48)O-3 (Pzt) Powders By A Modified Coprecipitation Method

Mixed Conducting Perovskite Materials As Superior Catalysts for Fast Aqueous-Phase Advanced Oxidation: A Mechanistic Study

Reverse Atom Capture on Perovskite Surface Enabling Robust and Efficient Cathode for Protonic Ceramic Fuel Cells

Synthesis of perovskite Pb(Zr0.52Ti0.48)O3 (PZT) powders by a modified coprecipitation method

Tungsten doped FeCoP2 nanoparticles embedded into carbon for highly efficient oxygen evolution reaction

Tuning electronic property and surface reconstruction of amorphous iron borides via W-P co-doping for highly efficient oxygen evolution

Controlled synthesis of quasi-single-crystal lead dioxide by polyvinylpyrrolidone for enhanced electrochemical ozone production

Microwave shock motivating the Sr substitution of 2D porous GdFeO 3 perovskite for highly active oxygen evolution

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method