Abstract:Applications of solid-phase microextraction (SPME) in the measurement of very hydrophobic organic compounds (VHOCs) are limited, partly due to the difficulty of calibrating SPME fibers for VHOCs. This study used a static SPME strategy with a large sample volume (1.6L) and a five-point calibration procedure to determine the distribution coefficients for a large suite of polychlorinated biphenyls (PCBs) and chlorinated pesticides between a polydimethylsiloxane (PDMS) phase (100μm thickness) coated on a glass fiber and seawater. An extraction time of 12 days was deemed adequate for equilibrium calibration from kinetic experiments. Two groups of randomly selected fibers divided into three batches (up to nine fibers in each batch) were processed separately with two gas chromatography–mass spectrometry (GC–MS) systems. Matrix effects arising from losses of the analytes to glass container walls and stirring bars were corrected. Relative standard deviations within the same batch were generally smaller than those for the entire group. Furthermore, KfVf (Kf and Vf are the distribution coefficient of an analyte between the polymer-coated fiber and aqueous phase and the fiber volume, respectively) values determined with two GC–MS systems were statistically different. These results indicate the calibrated KfVf values were less affected by the random selection of SPME fibers than by other experimental conditions, and therefore average KfVf values may be used for the same type of commercially available SPME fibers. The relative accuracy of our calibration method was similar to that of a previous study [P. Mayer, W.H.J. Vaes, J.L.M. Hermens, Anal. Chem. 72 (2000) 459] employing different coating thickness and calibration procedure. The present study also obtained a bell-shaped relationship between logKf and logKow (octanol–water partition coefficient) for PCB congeners with the maximum logKf corresponding to logKow∼6.5. This bell-shaped relationship was attributed mainly to steric effects arising from the interplay between the PDMS thickness and molecular sizes of the target analytes.

Experimental verification of a model describing solid phase microextraction (SPME) of freely dissolved organic pollutants in sediment porewater

Measuring Freely Dissolved DDT and Metabolites in Seawater Using Solid-Phase Microextraction with Performance Reference Compounds

Predicting organic contaminant concentrations in sediment porewater using solid-phase microextraction.

Using disposable solid-phase microextraction (SPME) to determine the freely dissolved concentration of polybrominated diphenyl ethers (PBDEs) in sediments.

Assessing Bioavailability of DDT and Metabolites in Marine Sediments Using Solid‐phase Microextraction with Performance Reference Compounds

Solid-Phase Microextraction (spme) with Stable Isotope Calibration for Measuring Bioavailability of Hydrophobic Organic Contaminants

Predicting Bioavailability of PAHs and PCBs with Porewater Concentrations Measured by Solid‐phase Microextraction Fibers

Determination of polydimethylsiloxane–seawater distribution coefficients for polychlorinated biphenyls and chlorinated pesticides by solid-phase microextraction and gas chromatography–mass spectrometry

Desorption Of Hydrophobic Compounds From Laboratory-Spiked Sediments Measured By Tenax Absorbent And Matrix Solid-Phase Microextraction

Isotopic Exchange on Solid-Phase Micro Extraction Fiber in Sediment under Stagnant Conditions: Implications for Field Application of Performance Reference Compound Calibration

Application of a static solid-phase microextraction procedure combined with liquid-liquid extraction to determine poly(dimethyl)siloxane-water partition coefficients for selected polychlorinated biphenyls.

High Performance Solid-Phase Extraction Cleanup Method Coupled with Gas Chromatography-Triple Quadrupole Mass Spectrometry for Analysis of Polychlorinated Naphthalenes and Dioxin-Like Polychlorinated Biphenyls in Complex Samples.

Investigation of the Kinetic Process of Solid Phase Microextraction in Complex Sample.

Exploration of metal-organic framework MOF-177 coated fibers for headspace solid-phase microextraction of polychlorinated biphenyls and polycyclic aromatic hydrocarbons

Developing a consistent model for predicting equilibration in polymeric passive samplers across various HOC classes in sediment pore water

Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Drop with High Performance Liquid Chromatography for Determination of Decabrominated Diphenyl Ether in Surficial Sediments

A novel dispersive liquid-liquid microextraction based on solidification of floating organic droplet method for determination of polycyclic aromatic hydrocarbons in aqueous samples

Development of a Novel Solid Phase Microextraction Calibration Method for Semi-Solid Tissue Sampling.

Principles of passive sampling for ex situ measurement of hydrophobic organic compounds in sediment: Key considerations on dilution, depletion, and equilibrium

Comparison of Chemical Approaches for Assessing Bioavailability of Sediment-Associated Contaminants.

Analysis of Polychlorinated Biphenyls in Biological Samples by Headspace Solid Phase Microextraction Coupled with Gas Chromatography