Abstract:The mechanical properties of cement-stabilized clay (CSC), are significantly inferior to that of concrete and mortar due to the presence of clay minerals. To reveal the interaction between clinker's functional constituent and clay minerals within the CSC matrix to promote the performance of stabilized clay, large data sets cross-scale nanoindentation coupled with thermogravimetric analyses were involved. Two commercially available clays (i.e., kaolin and bentonite, whose dominant clay minerals are kaolinite and montmorillonite, respectively) stabilized by two key functional constituents of cement clinker, i.e., tricalcium silicate (C3S) and tricalcium aluminate (C3A), were investigated to unravel the primary hydration of the cement clinker, pozzolanic reactions with clay minerals, and the microstructure's evolution. Large data sets of elastic modulus and hardness derived from the nanoindentation tests were statistically investigated by two deconvolution methods: probability density function and cumulative distribution function. The results indicated that calcium silicate hydrates (C-S-H) and calcium aluminate hydrates (C-A-H) were the major reaction products for C3S-stabilized and C3A-stabilized clays. However, during the secondary pozzolanic reaction process, the dissolved colloids from the clay minerals and the hydrated products would react and accumulate at the interface between the primary cementitious paste and clay particles to form a new soft, porous phase. The deconvolution and thermogravimetric analysis also indicate that more pozzolanic products and high-density (HD) porous phases were detected in bentonite than in kaolin, suggesting that the pozzolanic reaction in montmorillonite is much more pronounced than that in kaolinite. This understanding can clarify the interaction between clay minerals, hydration products, and distinct CSC for traditional cementitious materials.

C-S-H Cluster Microstructure and Bonding Force Investigation Base on AFM Technology

INVESTIGATION ON NANO-SCALE MICROSTRUCTURE OF C-S-H WITH ATOMIC FORCE MICROSCOPE

Measuring the surface cohesion of calcium silicate hydrate

Mechanical behaviour of C-S-H agglomerates at multiscale

Evaluation of the nanostructure of calcium silicate hydrate based on atomic force microscopy-infrared spectroscopy experiments

Probing Nanostructure of Calcium Silicate Hydrate by Afm and Nanoindentation

Uniaxial tensile study of calcium aluminosilicate hydrate (C-A-S-H): Structure, dynamics and mechanical properties

Mechanical Properties Evaluation of Polymer-Binding C-S-H Structure from Nanoscale to Macroscale: Hydroxyl-Terminated Polydimethylsiloxane (PDMS) Modified C-S-H

The Morphology of C-S-H in Low Water/Cement Ratio Paste from Nano to Micro Scale

Identification of Chemical Bonds and Microstructure of Hydrated Tricalcium Silicate (C3S) by a Coupled Micro-Raman/BSE-EDS Evaluation

Aluminum-Induced Interfacial Strengthening in Calcium Silicate Hydrates: Structure, Bonding, and Mechanical Properties

Effect of Ca/Si and Al/Si on micromechanical properties of C(-A)-S-H

The Microstructure Formation of C-S-H in the HPC Paste from Nano-Scale Feature

The nanomechanical properties of non-crosslinked calcium aluminosilicate hydrate: The influences of tetrahedral Al and curing age

Molecular dynamics study on structural characteristics of amorphous C‐S‐H with different Ca/Si ratios

A Molecular Dynamics Study of Calcium Silicate Hydrates-Aggregate Interfacial Interactions and Influence of Moisture

Al Content Effect on Microstructure and Strength in Calcium Aluminosilicate Hydrate Chain Integration

New insights into the non-classical nucleation of C-S-H

Microscopic phase identification of cement-stabilized clay by nanoindentation and statistical analytics

Multi-scale investigation on composition-structure of C-(A)-S-H with different Al/Si ratios under attack of decalcification action

Molecular Dynamics Study on Mechanical Properties of C-S-H Composites