Abstract:The seam tracking operation is essential for extracting welding seam characteristics which can instruct the motion of a welding robot along the welding seam path. The chief tasks for seam tracking would be divided into three partitions. First, starting and ending points detection, then, weld edge detection, followed by joint width measurement, and, lastly, welding path position determination with respect to welding robot co-ordinate frame. A novel seam tracking technique with a four-step method is introduced. A laser sensor is used to scan grooves to obtain profile data, and the data are processed by a filtering algorithm to smooth the noise. The second derivative algorithm is proposed to initially position the feature points, and then linear fitting is performed to achieve precise positioning. The groove data are transformed into the robot’s welding path through sensor pose calibration, which could realize real-time seam tracking. Experimental demonstration was carried out to verify the tracking effect of both straight and curved welding seams. Results show that the average deviations in the X direction are about 0.628 mm and 0.736 mm during the initial positioning of feature points. After precise positioning, the average deviations are reduced to 0.387 mm and 0.429 mm. These promising results show that the tracking errors are decreased by up to 38.38% and 41.71%, respectively. Moreover, the average deviations in both X and Z direction of both straight and curved welding seams are no more than 0.5 mm, after precise positioning. Therefore, the proposed seam tracking method with four steps is feasible and effective, and provides a reference for future seam tracking research.

Research of Welding Seam Depression in Welding Rapid Prototyping

Research and development on 3D welding rapid prototyping system based on metal material

Key Technologies of Data Process for Welding Rapid Prototyping

Research on rapid repairing techniques for auto panel dies

Rapid Digital Repair Technique for Auto Panel Dies

Study on the Structure and Property of the Low Carbon Steel Part Based on the Rapid Prototyping Technique of Welding

Finite element simulation of welding process and real-time monitoring assessment

TIG Welding Rapid Prototyping Surfacing Quality Vision Detecting System

The Boom of the Welding Residual Stress Aging Treatment

The Choice Of Welding Parameters And Prediction Of Weld Seam Dimensions For Welding Rapid Prototyping

Study on Automobile Welding Jig Rapid Design System Based on Parametric Technology

Research of TIG Deposit Surfacing Welding Rapid Prototyping Vision Sensor System

Study on the hinged welding technology of HG785D thin-wall grooved parts

Welding Process Carbon Footprint Analysisand Process Parameters Optimization

Study of the Mechanism of a Stable Deposited Height During GMAW-Based Additive Manufacturing

Research on weld seam feature extraction and defect identification technology

Numerical and Experimental Investigation of Molten Metal Droplet Deposition Applied to Rapid Prototyping

Finite Element Analysis and Experimental Study on Welding Residual Stress of Heavy-Duty Turning Tool

A Novel Seam Tracking Technique with a Four-Step Method and Experimental Investigation of Robotic Welding Oriented to Complex Welding Seam

Experimental and Simulation Study on Welding Characteristics and Parameters of Gas Metal Arc Welding for Q345qD Thick-Plate Steel

Manufacture of the Die of an Automobile Deck Part Based on Rapid Prototyping and Rapid Tooling Technology